{"product_id":"seco-02575428-turning-insert-cp200-solid-carbide-lcmr","title":"Seco 02575428 Turning Insert CP200 Solid Carbide Lcmr","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 02575428 is a solid carbide multi-directional turning insert designed for precision single-end turning operations in demanding metal removal applications. Built to the LCMR insert style in the MDT series, this insert features a PVD-applied TiAlN\/TiN coating over a micrograin solid carbide substrate in the CP200 manufacturer grade. Key cutting geometry includes a 0.236-inch maximum cutting width, a 0.177-inch cutting height, a 0.031-inch corner radius, and a 0.630-inch insert length. The neutral hand orientation and FT chipbreaker make it suitable for a range of turning setups. Installation and use are performed by machinists and tool-and-die professionals in CNC and manual turning environments.\u003c\/p\u003e\u003cp\u003eThis insert is rated for primary workpiece materials classified under M and S material codes, covering superalloys and titanium. The CP200 grade and PVD coating are selected for heat and wear resistance in these difficult-to-machine material groups. The 7-degree relief angle and FT chipbreaker geometry work together to control chip flow and reduce cutting forces in interrupted or continuous superalloy turning. The LCMR160608-0600-FT style designation identifies the insert geometry, size code 160608, and chipbreaker configuration, allowing direct cross-reference when sourcing replacements for existing toolholders in that insert family.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCP200 micrograin solid carbide grade with PVD TiAlN\/TiN coating for extended wear life in superalloy and titanium turning\u003c\/li\u003e\n\u003cli\u003eLCMR insert style, size code 160608, MDT series — direct fit for compatible MDT-style toolholders\u003c\/li\u003e\n\u003cli\u003eFT chipbreaker geometry for controlled chip evacuation in tough workpiece materials\u003c\/li\u003e\n\u003cli\u003e0.236-inch maximum cutting width and 0.031-inch corner radius for defined cut geometry\u003c\/li\u003e\n\u003cli\u003eNeutral hand orientation for flexible setup in both conventional and CNC turning applications\u003c\/li\u003e\n\u003cli\u003eSingle-end insert design; sold individually with a minimum order quantity of 10 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in MDT-series toolholders accepting LCMR-style inserts with size code 160608. Intended for machining superalloy and titanium workpiece materials as designated by material codes M and S.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert seating and clamping should be performed with the machine spindle stopped and all power isolated from the CNC or manual turning center. Use the appropriate torx or hex key specified by the toolholder manufacturer when securing the clamping screw — do not overtighten. Inspect the insert pocket for chips or debris before seating the insert to ensure full, flush contact. Verify correct insert orientation and hand designation before resuming cutting operations.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: LCMR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStyle Designation\u003c\/strong\u003e: LCMR160608-0600-FT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: MDT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: CP200\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\/TiN, PVD Coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 160608\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Width\u003c\/strong\u003e: 0.236 inches (6.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 0.177 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.630 inches (15.90 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.031 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: FT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Radius Insert\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Superalloy, Titanium (Material Code M, S)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02575428\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558392561970,"sku":"02575428","price":521.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3956a0b029462dac0562505d690da735.jpg?v=1786411029","url":"https:\/\/voomisupply.com\/products\/seco-02575428-turning-insert-cp200-solid-carbide-lcmr","provider":"Voomi Supply","version":"1.0","type":"link"}