{"product_id":"seco-02566464-turning-insert-cp200-solid-carbide-mdt","title":"Seco 02566464 Turning Insert CP200 Solid Carbide Mdt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 02566464 is a solid carbide multi-directional turning insert in the MDT series, designed for high-performance turning operations in demanding material applications. Built from micrograin solid carbide with a PVD-applied TiAlN\/TiN coating, this insert carries a manufacturer grade of CP200 and features an LCMF insert style. It delivers a maximum cutting width of 0.118 inches, a cutting height of 0.177 inches, a corner radius of 0.059 inches, and an insert length of 0.674 inches. The neutral hand orientation and MP chipbreaker make it well suited for CNC turning centers requiring consistent chip control in difficult-to-machine materials. Licensed machinists and tooling specialists are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis insert is intended for use on superalloys and titanium workpieces, corresponding to material codes M and S. The MDT series is built around multi-directional turning applications where a single insert must handle axial, radial, and combination cuts without repositioning. Double-end construction extends usable tool life, making it a practical choice for production turning environments where downtime between insert changes must be minimized. It is appropriate for both roughing and finishing passes within its rated cutting parameters.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMicrograin solid carbide substrate with PVD TiAlN\/TiN coating for wear resistance on superalloys and titanium\u003c\/li\u003e\n  \u003cli\u003eCP200 manufacturer grade optimized for difficult-to-machine M and S material codes\u003c\/li\u003e\n  \u003cli\u003eDouble-end design doubles usable insert life per piece\u003c\/li\u003e\n  \u003cli\u003eMP chipbreaker geometry for controlled chip evacuation in high-temperature alloys\u003c\/li\u003e\n  \u003cli\u003eFull radius insert with 0.059 inch corner radius reduces stress concentration at cutting edge\u003c\/li\u003e\n  \u003cli\u003e7-degree relief angle supports free cutting with reduced flank wear\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation fits standard MDT-series toolholders without left or right offset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with MDT-series toolholders accepting LCMF-style inserts with size code 1603M0. Compatible style designation is LCMF1603M0-0300-MP.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician following the machine tool manufacturer's lockout\/tagout procedures before any insert change. Seat the insert fully in the toolholder pocket and verify torque on the clamping screw with a calibrated torque wrench per the toolholder manufacturer's specification. Inspect the pocket and clamping surfaces for chips or debris before seating a new insert. Do not exceed the cutting parameters specified for CP200 grade in superalloy and titanium applications, as overloading the edge can cause catastrophic insert failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: LCMF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 1603M0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: MDT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: CP200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\/TiN (PVD Coated)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: MP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Width\u003c\/strong\u003e: 0.118 inches (3.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 0.177 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.059 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.674 inches (17.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius Insert\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Superalloy, Titanium (M, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02566464\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51563911119154,"sku":"02566464","price":66.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/745d6253048711253440d23ca2169f30.jpg?v=1786506605","url":"https:\/\/voomisupply.com\/products\/seco-02566464-turning-insert-cp200-solid-carbide-mdt","provider":"Voomi Supply","version":"1.0","type":"link"}