{"product_id":"seco-02551635-mdt-turning-insert-cp200-solid-carbide","title":"Seco 02551635 Mdt Turning Insert CP200 Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 02551635 is a solid carbide multi-directional turning insert in the MDT series, designed for precision turning and grooving operations on difficult-to-machine materials. Built to style LCMR1604M0-0400-MP with a neutral hand orientation, it features a micrograin carbide substrate in the CP200 grade and a PVD-applied TiAlN\/TiN coating for wear resistance and thermal stability. The insert delivers a maximum cutting width of 0.157 inches and a cutting height of 0.177 inches, with a full corner radius of 0.079 inches and an insert length of 0.679 inches. The MP chipbreaker geometry supports stable chip control in interrupted and continuous cuts. Installed by machinists and tool-and-die professionals, this insert fits standard MDT-series toolholders.\u003c\/p\u003e\n\u003cp\u003eThe 02551635 is suited for turning, profiling, and grooving applications where primary workpiece materials are superalloys and titanium alloys, classified under material codes M and S. Its neutral hand design allows use in both left- and right-hand tool setups, and the single-end configuration ensures consistent edge geometry for each insert. The 7-degree relief angle supports clearance in tight-tolerance finishing and semi-finishing passes. This insert is packaged individually and sold in a minimum order quantity of 10 units.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCP200 micrograin solid carbide substrate for toughness in superalloy and titanium machining\u003c\/li\u003e\n  \u003cli\u003ePVD TiAlN\/TiN coating for heat resistance and extended tool life\u003c\/li\u003e\n  \u003cli\u003eFull corner radius (0.079 inches) and MP chipbreaker geometry for controlled chip flow\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation compatible with both left- and right-hand toolholders\u003c\/li\u003e\n  \u003cli\u003e7-degree relief angle provides clearance for finishing and semi-finishing operations\u003c\/li\u003e\n  \u003cli\u003eMDT series style LCMR1604M0-0400-MP for direct toolholder compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in MDT-series multi-directional turning and grooving toolholder systems accepting LCMR1604M0 style inserts. Primary target workpiece materials are superalloys and titanium alloys (ISO material groups M and S).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis insert is installed by qualified machinists on CNC or manual turning centers. Power down and lock out the machine before changing inserts. Use the correct torque driver for the insert screw to avoid seat damage — refer to the toolholder manufacturer specification for clamping torque. Inspect the insert pocket and clamping surfaces for debris or wear before seating a new insert.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: LCMR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle Designation\u003c\/strong\u003e: LCMR1604M0-0400-MP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: MDT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: CP200\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\/TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Width\u003c\/strong\u003e: 0.157 inches (4.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 0.177 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.679 inches (17.10 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.079 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: MP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius Insert\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Superalloy, Titanium (ISO M, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 1604M0\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02551635\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51559571521842,"sku":"02551635","price":444.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7b300f618b670c3db0f970ba24350400_d0ac43bb-ee4e-4cd2-8664-c6fb9d13893b.jpg?v=1786435626","url":"https:\/\/voomisupply.com\/products\/seco-02551635-mdt-turning-insert-cp200-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}