{"product_id":"seco-02466012-replaceable-tip-drill-10-5-10-99mm-weldon","title":"Seco 02466012 Replaceable-tip Drill 10.5-10.99mm Weldon","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 02466012 is a replaceable-tip drill designed for precision holemaking in metalworking and machining operations. Part of the SD103 series, it accepts SD100 insert tips and covers a drill diameter range of 10.5 mm (0.4134 inches) to 10.99 mm (0.4327 inches). The maximum drill depth is 1.18 inches, with an overall length of 3.976 inches. A 5\/8-inch Weldon flat shank provides positive rotational engagement in compatible toolholders. Through-coolant capability directs cutting fluid directly to the cutting edge, supporting chip evacuation and thermal management during deep or high-feed drilling cycles. This tool is installed and operated by machinists and CNC tooling technicians.\u003c\/p\u003e\n\u003cp\u003eThe 02466012 is suited for holemaking applications in production machining environments, including CNC machining centers and drill presses configured for Weldon flat shank toolholders. The SD103 series body with a 3xD depth-to-diameter ratio makes it appropriate for moderate-depth bores in ferrous and non-ferrous materials. The replaceable-tip design reduces tooling cost by allowing insert swap-out without replacing the full drill body, making it practical for high-volume production runs where consistent hole geometry is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaceable SD100 insert tip — swap inserts without replacing the drill body\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant design channels fluid to the cutting zone for improved chip control and tool life\u003c\/li\u003e\n  \u003cli\u003eWeldon flat shank (0.625 inches diameter) ensures positive drive and minimal slippage in compatible holders\u003c\/li\u003e\n  \u003cli\u003e3xD drill depth-to-diameter ratio supports stable, accurate bore depth in production applications\u003c\/li\u003e\n  \u003cli\u003eFlute length of 1.496 inches and body length of 2.086 inches provide a compact, rigid geometry\u003c\/li\u003e\n  \u003cli\u003eCompliant with ISO 9766 coolant-through tooling standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SD100 replaceable insert tips in SD103 series toolholders. Accepts 5\/8-inch Weldon flat shank toolholders. Refer to SECO SD103 series documentation for the full list of compatible insert grades and geometries.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC tooling technician with the machine powered off and locked out per applicable safety procedures. Secure the Weldon flat shank firmly in a compatible holder with the set screw engaging the flat to prevent axial pullout. Verify through-coolant supply lines are connected and unobstructed before running the spindle. Inspect the SD100 insert tip for seating and condition before each use; replace the insert if wear exceeds acceptable limits for the material and tolerance being held.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Drill Diameter\u003c\/strong\u003e: 10.50 mm (0.4134 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Diameter\u003c\/strong\u003e: 10.99 mm (0.4327 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Depth\u003c\/strong\u003e: 1.18 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Depth by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.976 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.496 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 2.086 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.889 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Insert Style\u003c\/strong\u003e: SD100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SD103\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 9766\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.37 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291502\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02466012\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558913933618,"sku":"02466012","price":467.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/da115ff13fe7277a908e4b0bb19a1676.jpg?v=1786422715","url":"https:\/\/voomisupply.com\/products\/seco-02466012-replaceable-tip-drill-10-5-10-99mm-weldon","provider":"Voomi Supply","version":"1.0","type":"link"}