{"product_id":"seco-02445823-replaceable-tip-drill-17-17-99mm-sd100","title":"Seco 02445823 Replaceable-tip Drill 17-17.99mm SD100","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 02445823 is a replaceable-tip drill designed for precision hole-making in metal cutting and machining applications. It accepts SD100 series inserts, allowing the cutting tip to be swapped out without replacing the entire tool body. The drill covers a diameter range of 17 to 17.99 mm (0.6693 to 0.7083 inches) and reaches a maximum drill depth of 1.18 inches. A through-coolant design channels fluid directly to the cutting zone, helping to extend insert life and clear chips efficiently. The 3\/4-inch Weldon flat shank provides positive drive with minimal runout in compatible holders.\u003c\/p\u003e\n\u003cp\u003eThis drill is suited for production and job-shop CNC machining environments where consistent hole geometry and fast cycle times are priorities. It is a good fit for milling centers and drill presses equipped with Weldon-style toolholders. The SD101 series toolholder body pairs with SD100 inserts, making this a modular system that reduces tooling inventory cost. Machinists working in aerospace, automotive, and general fabrication shops will find the through-coolant feature particularly useful when drilling steel, stainless, and cast iron at elevated feed rates.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eReplaceable SD100 insert tip — change the cutting edge without replacing the drill body\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant design delivers fluid directly to the cutting zone for chip evacuation and thermal control\u003c\/li\u003e\n  \u003cli\u003eDiameter range of 17 to 17.99 mm accommodates a range of close-tolerance hole sizes\u003c\/li\u003e\n  \u003cli\u003e3\/4-inch Weldon flat shank provides secure, positive drive in standard Weldon-style holders\u003c\/li\u003e\n  \u003cli\u003eSD101 series body with 4.61-inch overall length suits a wide range of spindle clearance requirements\u003c\/li\u003e\n  \u003cli\u003eFlute length of 0.65 inches and body length of 2.409 inches support rigid, low-deflection drilling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with SD100 series replaceable drill inserts. Designed for use with SD101 series toolholder bodies. Requires a Weldon flat toolholder with a 3\/4-inch bore.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or toolroom technician. Before mounting, confirm the spindle and toolholder are de-energized and the machine is in a locked-out state per shop lockout\/tagout procedures. Seat the Weldon flat shank fully into the holder and tighten the set screw against the flat to the toolholder manufacturer's specification. Verify through-coolant ports are clear and coolant pressure is within the machine spindle's rated range before starting the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Drill Diameter\u003c\/strong\u003e: 17.00 mm (0.6693 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Diameter\u003c\/strong\u003e: 17.99 mm (0.7083 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Depth\u003c\/strong\u003e: 1.18 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.61 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.65 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 2.409 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.772 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Insert Style\u003c\/strong\u003e: SD100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SD101\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.2 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291502\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 02445823\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51562108289330,"sku":"02445823","price":469.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8a345609d5df19d7608e36785db90882.jpg?v=1786471774","url":"https:\/\/voomisupply.com\/products\/seco-02445823-replaceable-tip-drill-17-17-99mm-sd100","provider":"Voomi Supply","version":"1.0","type":"link"}