{"product_id":"seco-00072376-indexable-threading-toolholder-internal-rh","title":"Seco 00072376 Indexable Threading Toolholder Internal Rh","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 00072376 is an indexable threading toolholder designed for internal threading operations on lathes and turning centers. Built in a right-hand configuration with a Snap Tap (SN) series toolholder style, it accepts 11NR inserts secured by a screw-clamp holding method. The shank measures 0.375 inches in diameter and 0.336 inches in height, with an overall length of 6.0 inches. The toolholder body is constructed from heavy metal, which provides the mass and rigidity needed to dampen vibration during threading cuts in bores. A licensed machinist or CNC lathe operator installs this toolholder in standard boring bar setups.\u003c\/p\u003e\u003cp\u003eThis toolholder is suited for internal threading in both production and job-shop environments where consistent thread form and insert repeatability are required. The minimum bore diameter is 0.45 inches, making it appropriate for threading relatively small-diameter bores. The back-of-bar to cutting edge and center-to-cutting edge dimensions are both 0.285 inches, allowing predictable tool offset entry in CNC offsets. Coolant-through capability is not included in this design.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eInternal right-hand threading configuration in Snap Tap (SN) toolholder style\u003c\/li\u003e\n\u003cli\u003eAccepts 11NR indexable threading inserts, secured by screw clamp\u003c\/li\u003e\n\u003cli\u003eHeavy metal body construction for vibration damping in boring bar applications\u003c\/li\u003e\n\u003cli\u003e0.45 inch minimum bore diameter for small-bore internal threading\u003c\/li\u003e\n\u003cli\u003e6.0 inch overall length for extended reach in deep-bore setups\u003c\/li\u003e\n\u003cli\u003eBack-of-bar and center-to-cutting edge both at 0.285 inches for consistent offset entry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned to accept 11NR series indexable threading inserts with a 1\/4 inch inscribed circle. Verify insert seat geometry and screw torque specification against the insert manufacturer's recommendation before use.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a qualified machinist or CNC lathe operator. Secure the toolholder in the machine turret or boring bar holder per the machine tool manufacturer's torque and clamping requirements before initiating any cut. Power down and lock out the machine before changing inserts or adjusting the toolholder. Do not exceed the minimum bore diameter specification, as insufficient clearance can cause insert contact with the bore wall and damage the cutting edge or workpiece.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Type\u003c\/strong\u003e: Internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: SN (Snap Tap)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: 11NR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 0.336 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.0 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bore Diameter\u003c\/strong\u003e: 0.45 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 0.285 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter to Cutting Edge\u003c\/strong\u003e: 0.285 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Heavy Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00072376\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51557880037682,"sku":"00072376","price":644.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9d7b2c69282cf0661be9c1f6c4c5cbb4.jpg?v=1786397213","url":"https:\/\/voomisupply.com\/products\/seco-00072376-indexable-threading-toolholder-internal-rh","provider":"Voomi Supply","version":"1.0","type":"link"}