{"product_id":"seco-00059697-carbide-replaceable-tip-drill-19-05mm-sd100","title":"Seco 00059697 Carbide Replaceable Tip Drill 19.05mm SD100","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 00059697 is a solid carbide replaceable tip drill in the SD100 series, designed for high-performance hole-making in steel and similar ferrous workpiece materials. The drill tip features a TiAlN coating applied via a PVD process, providing heat resistance and extended tool life under demanding cutting conditions. The included point angle is 140 degrees, and the tip measures 19.05mm in diameter and 15.2mm in height (approximately 0.5984 inches). Through-coolant capability allows cutting fluid delivery directly to the cutting zone, reducing heat buildup and aiding chip evacuation in deep-hole drilling applications. This tool is intended for use in CNC machining centers and similar production drilling environments.\u003c\/p\u003e\u003cp\u003eThe 00059697 is suited for production drilling operations where repeatable hole quality and tool economy are priorities. The replaceable tip design allows the carbide insert to be swapped at the machine without replacing the entire drill body, reducing tooling cost per hole. The P-geometry insert designation identifies it as optimized for steel (ISO material group P), making it appropriate for mild steel, alloy steel, and similar materials common in general machining and fabrication shops. Through-coolant support makes it well-suited for deeper holes where conventional flood coolant is insufficient.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide replaceable tip with TiAlN PVD coating for heat and wear resistance\u003c\/li\u003e\n\u003cli\u003e140-degree included point angle for aggressive, self-centering entry in steel\u003c\/li\u003e\n\u003cli\u003e19.05mm cutting diameter with 15.2mm tip height (0.5984 inches)\u003c\/li\u003e\n\u003cli\u003eThrough-coolant design for direct coolant delivery to the cutting edge\u003c\/li\u003e\n\u003cli\u003eP-geometry insert optimized for ISO P workpiece materials including steel\u003c\/li\u003e\n\u003cli\u003eSD100 series body compatibility for economical tip replacement without full tool discard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a replaceable tip insert for SECO SD100 series drill bodies. Compatible workpiece materials are classified under ISO material group P, primarily steel. Confirm shank body compatibility with the SD100 series body rated for 19.05mm tip diameter before ordering.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation of replaceable carbide drill tips should be performed by a qualified machinist or toolroom technician. Ensure the machine spindle is fully stopped and locked out before seating or removing the tip insert. The mating surfaces of the drill body and tip should be clean and free of chips or debris before assembly to ensure proper seating and runout accuracy. Follow the drill body manufacturer's torque and assembly procedure for the SD100 series.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SD100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 19.05mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Height\u003c\/strong\u003e: 15.2mm (0.5984 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (ISO Group P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00059697\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51564150456626,"sku":"00059697","price":224.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/923b913922f086c28a094fcb604a0d17_136a8d89-888e-445a-bf4a-217e6d515f45.jpg?v=1786512445","url":"https:\/\/voomisupply.com\/products\/seco-00059697-carbide-replaceable-tip-drill-19-05mm-sd100","provider":"Voomi Supply","version":"1.0","type":"link"}