{"product_id":"seco-00048839-carbide-cutoff-insert-cp600-tialn-tin","title":"Seco 00048839 Carbide Cutoff Insert CP600 Tialn Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 00048839 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. Part of the Series 150.10 platform, it features a CP600 manufacturer grade with a PVD-applied TiAlN and TiN multilayer coating for extended tool life across a range of workpiece materials. The insert has a 0.161 inch cutting width, a 0.009 inch corner radius, and a neutral lead angle with zero relief angle. It is held in place by a clamp-style toolholder and is intended for single-end use. Machinists and toolroom technicians working in production or job-shop environments rely on this geometry for clean, efficient cutoff work.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for cut-off applications on universal workpiece materials, covering a broad range of metals typically encountered in turning operations. The chipbreaker designation 12 provides chip control geometry matched to the 0.161 inch width for consistent chip evacuation during parting. It is appropriate for use in both light-production and high-cycle turning environments where consistent groove width and surface finish are required. The neutral hand orientation allows straightforward mounting without lateral offset adjustments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCP600 solid carbide grade with PVD TiAlN and TiN coating for wear resistance and heat management\u003c\/li\u003e\n  \u003cli\u003e0.161 inch cutting width with 0.009 inch corner radius for precise parting geometry\u003c\/li\u003e\n  \u003cli\u003eNeutral lead angle and neutral hand — no lateral offset required at installation\u003c\/li\u003e\n  \u003cli\u003eChipbreaker designation 12 for controlled chip formation during cutoff\u003c\/li\u003e\n  \u003cli\u003eClamp-style insert holding method for secure, repeatable seating in compatible toolholders\u003c\/li\u003e\n  \u003cli\u003eSingle-end insert design rated for universal OD workpiece material code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with Series 150.10 clamp-style cutoff and grooving toolholders that accept a size code 4 insert. Specific toolholder compatibility should be verified against Series 150.10 holder documentation before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis insert is installed and replaced by a machinist or toolroom technician. Always power down and lock out the machine before indexing or replacing the insert. Use the correct clamping torque specified by the toolholder manufacturer — do not overtighten the clamp screw, as this can crack the insert body. Confirm the insert is fully seated in the pocket before resuming cutting operations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 150.10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: CP600\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN and TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.161 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.009 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.354 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees (Neutral)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: 12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Cut-off\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Universal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00048839\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51560384659762,"sku":"00048839","price":308.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9f67cade93e62529c1f6cb9f8d10ca3b.jpg?v=1786451994","url":"https:\/\/voomisupply.com\/products\/seco-00048839-carbide-cutoff-insert-cp600-tialn-tin","provider":"Voomi Supply","version":"1.0","type":"link"}