{"product_id":"seco-00013327-lh-scgc-indexable-turning-toolholder","title":"Seco 00013327 Lh Scgc Indexable Turning Toolholder","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SECO 00013327 is a left-hand SCGC-style indexable turning toolholder designed for general-purpose single-point turning operations on CNC lathes and manual turning centers. Built from steel with a screw-lock insert holding method, it accepts CC..32.5. series inserts with a 3\/8-inch inscribed circle. The shank measures 0.5 inches wide by 0.5 inches high with an overall length of 3.5 inches. Neutral rake geometry at 0 degrees provides predictable chip formation across a broad range of workpiece materials. Licensed machinists and CNC programmers specify this holder for production turning where insert indexability and repeatable edge location are essential.\u003c\/p\u003e\u003cp\u003eThis toolholder is rated for universal primary workpiece material compatibility, covering material codes H, K, M, N, P, and S. It is suited for residential and commercial machine shop environments, job shops, and production floor turning cells. The 90-degree lead angle and left-hand cutting direction make it appropriate for facing and straight turning approaches where the tool feeds from right to left. It is not equipped with coolant-through capability, so external coolant delivery must be used when flood or mist cooling is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLeft-hand cutting direction with 90-degree lead angle for right-to-left feed turning\u003c\/li\u003e\n\u003cli\u003eScrew-lock insert clamping for secure, repeatable insert seating under interrupted cuts\u003c\/li\u003e\n\u003cli\u003eAccepts CC..32.5. inserts, including CCMT 32.52 geometry\u003c\/li\u003e\n\u003cli\u003eNeutral rake angle (0 degrees) compatible with a wide range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eSteel toolholder construction for rigidity and durability in production environments\u003c\/li\u003e\n\u003cli\u003eCompact 0.5 x 0.5 inch shank suits smaller turret stations and light-duty lathes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with CC..32.5. series inserts, including CCMT 32.52. The 3\/8-inch inscribed circle insert and screw-lock holding method are standard for SCGC-style toolholders in this shank size. Verify turret bore and clamping requirements before installation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or toolroom personnel. Power down and fully de-energize the machine tool before seating or removing the toolholder from the turret. Use the appropriate torque wrench and insert screw driver to clamp the insert per the machine tool and toolholder manufacturer guidelines. Confirm tool offset and edge position after each insert index before returning the machine to cycle.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: SCGC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: CC..32.5. (CCMT 32.52)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Insert Size Code\u003c\/strong\u003e: CC325\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.375 inches (3\/8 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw Lock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 0.62 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Universal (H, K, M, N, P, S)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Turning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00013327\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51560794063154,"sku":"00013327","price":177.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2698c33aa46108fa25515e503795b53e.jpg?v=1786457656","url":"https:\/\/voomisupply.com\/products\/seco-00013327-lh-scgc-indexable-turning-toolholder","provider":"Voomi Supply","version":"1.0","type":"link"}