{"product_id":"seco-00003860-turning-insert-spg422f-883-carbide-0-5in-ic","title":"Seco 00003860 Turning Insert SPG422F 883 Carbide 0.5in Ic","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 00003860 is a solid carbide, uncoated turning insert in the SPG4 flat-top series, designed for high-precision metal removal on difficult-to-machine materials. Built to ANSI and ISO standards with an ISO code of SPGN120308 and an industry standard number of SPG422F, this insert features a square shape with a 90-degree included angle, a 0.5-inch inscribed circle, a 1\/32-inch (0.0315 inch) corner radius, and an insert thickness of 1\/8 inch. Grade 883 carbide provides the hardness and thermal resistance required for cutting superalloys and titanium in demanding production environments. It is clamped in place and suited for positive-rake toolholders.\u003c\/p\u003e\n\u003cp\u003eThis insert is rated for turning, facing, and boring operations, with a maximum depth of cut of 0.4409 inches. Its primary target workpiece material is superalloys and titanium (ISO material code S), with secondary suitability for stainless steel, cast iron, non-ferrous materials, and hardened materials (ISO codes M, K, N, H). The flat-top chip breaker geometry and honed cutting edge style make it well suited to finishing and semi-finishing passes where edge integrity is critical. It is commonly used by machinists and tooling specialists in aerospace, energy, and precision-component manufacturing environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 883 solid carbide, uncoated (bright finish) for maximum edge sharpness on abrasive superalloys and titanium\u003c\/li\u003e\n  \u003cli\u003eSquare insert shape with 90-degree included angle and positive rake for reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eFour cutting edges for extended tool life and lower cost per edge\u003c\/li\u003e\n  \u003cli\u003eFlat-top chip breaker with honed cutting edge style for consistent surface finish\u003c\/li\u003e\n  \u003cli\u003eClamp-style holding method with tolerance code G for repeatable insert positioning\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI and ISO standards; ISO code SPGN120308\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in SPG-series clamp-style toolholders that accept a 0.5-inch inscribed circle, 1\/8-inch thick square insert with clearance code P and tolerance code G. Suitable for turning, facing, and boring applications on superalloys, titanium, stainless steel, cast iron, non-ferrous metals, and hardened materials.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or tooling technicians. Ensure the machine spindle is fully stopped and the toolholder is secured in the turret before seating or replacing the insert. Verify the clamp and seat pocket are free of chips and debris before torquing the clamp screw to the toolholder manufacturer specification. Inspect the cutting edge condition and insert seating after the first test pass before committing to full production feeds and speeds.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: SPG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SPG4 Flat Top\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: SPG422F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: SPGN120308\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 883\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: S10, S20, S30\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Uncoated (Bright)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Square (Code S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 11 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5 inches (12.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Width\u003c\/strong\u003e: 0.5 inches (12.70 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0315 inches (1\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.4409 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: Flat Top\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Superalloys and Titanium (Code S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material Codes\u003c\/strong\u003e: M, K, N, H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Boring, Facing, Turning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI, ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00003860\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51558152732978,"sku":"00003860","price":281.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/95f70b74d504f419426a61c551834898.jpg?v=1786404720","url":"https:\/\/voomisupply.com\/products\/seco-00003860-turning-insert-spg422f-883-carbide-0-5in-ic","provider":"Voomi Supply","version":"1.0","type":"link"}