{"product_id":"seco-00000912-milling-insert-xomx180608r-m10-f40m-carbide","title":"Seco 00000912 Milling Insert XOMX180608R-M10 F40M Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SECO 00000912 is a solid carbide milling insert carrying the ANSI and ISO designation XOMX180608R-M10 with a manufacturer grade of F40M. This single-sided, right-hand parallelogram insert features a PVD-applied TiAlN and TiN dual coating over a fine-grain carbide substrate. It offers two cutting edges, a positive rake angle of 22.4 degrees, a 15-degree relief angle, and a honed cutting edge style. The M10 chip breaker geometry supports controlled chip flow across a range of milling applications. The insert is secured by screw-type holding and is designed for use in compatible indexable milling cutters.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for milling operations on steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium. The F40M grade with PVD coating is appropriate for both roughing and semi-finishing passes where edge toughness and heat resistance are priorities. The XOMX180608R-M10 geometry targets applications where positive rake and a controlled corner radius reduce cutting forces and extend tool life. It is compatible with the R217.69-18 and R220.69-18 cutter series from SECO, making it a direct fitment insert for those tool bodies in the XOMX-18 series.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with fine-grain substrate for edge integrity under interrupted cuts\u003c\/li\u003e\n  \u003cli\u003ePVD-applied TiAlN and TiN dual coating for thermal resistance and wear protection\u003c\/li\u003e\n  \u003cli\u003ePositive 22.4-degree rake angle reduces cutting forces on the workpiece\u003c\/li\u003e\n  \u003cli\u003eM10 chip breaker geometry supports chip control across primary workpiece materials\u003c\/li\u003e\n  \u003cli\u003eTwo cutting edges per insert with right-hand orientation\u003c\/li\u003e\n  \u003cli\u003eHoned cutting edge style for consistent, repeatable edge condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with SECO cutter series R217.69-18 and R220.69-18. The insert follows the XOMX-18 series standard and conforms to ANSI and ISO code XOMX180608R-M10.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician using the screw-type clamping method standard to XOMX-series tool bodies. Before indexing or replacing inserts, confirm that the machine spindle is fully stopped and locked out per facility lockout and tagout procedures. Seat the insert fully in the pocket and torque the clamping screw to the value specified in the cutter body documentation — do not estimate torque. Inspect the pocket and seating surfaces for chips or wear before mounting a new insert.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: XOMX180608R-M10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI Code\u003c\/strong\u003e: XOMX180608R-M10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: XOMX180608R-M10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: XOMX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Parallelogram\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 180608\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: XOMX-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: F40M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide, Fine Grain\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN and TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: M10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.4409 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 0.2520 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 0.4409 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 0.6693 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0315 inches (1\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1969 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.6693 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Effective Length\u003c\/strong\u003e: 0.6693 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 22.4 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Edge Style\u003c\/strong\u003e: Honed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double Sided\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Cast Iron, Superalloys, Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Materials\u003c\/strong\u003e: Cast Iron, Non-Ferrous Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Series Compatibility\u003c\/strong\u003e: R217.69-18, R220.69-18\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SECO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 00000912\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SECO TOOLS","offers":[{"title":"Default Title","offer_id":51557486199090,"sku":"00000912","price":411.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8f1ddf8dd2c3a68a0f47e7f9f3391042.jpg?v=1786389215","url":"https:\/\/voomisupply.com\/products\/seco-00000912-milling-insert-xomx180608r-m10-f40m-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}