{"product_id":"scientific-cutting-tools-en250-30-engraving-cutter","title":"Scientific Cutting Tools EN250-30 Engraving Cutter","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SCIENTIFIC CUTTING TOOLS EN250-30 is a solid carbide engraving cutter designed for precision material removal in engraving, marking, and detail-cutting applications. Built with a conical point geometry and a 30-degree included angle, it produces sharp, clean lines at a tip diameter of 0.009 inches. The submicron carbide grade provides the hardness and edge retention needed for fine-detail work on metals, plastics, and composites. The uncoated finish makes it well-suited for applications where coating adhesion or material compatibility is a concern. Machinists, toolmakers, and CNC programmers are the primary installers and operators of this tool.\u003c\/p\u003e\n\u003cp\u003eThis engraving cutter is used in CNC machining centers and manual engraving setups for fine-line work on flat or contoured surfaces. Typical applications include part marking, logo engraving, serial number stamping, and decorative engraving on hardened or soft materials. The 1\/4-inch shank diameter fits standard collet systems and tool holders used in most machining environments. The 0.447-inch length of cut gives adequate depth capacity for most engraving tasks without excessive tool deflection.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e30-degree included angle conical point for precise, sharp line definition\u003c\/li\u003e\n  \u003cli\u003e0.009-inch tip diameter enables extremely fine detail work\u003c\/li\u003e\n  \u003cli\u003eSubmicron solid carbide construction for hardness and wear resistance\u003c\/li\u003e\n  \u003cli\u003eUncoated finish suitable for a broad range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction compatible with standard CNC spindle rotation\u003c\/li\u003e\n  \u003cli\u003e1\/4-inch shank fits widely available collets and tool holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use engraving cutter for CNC machining centers and engraving machines equipped with 1\/4-inch collet or tool holder systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and setup should be performed by a qualified machinist or CNC technician. Ensure the spindle is fully stopped and machine power is off before inserting or removing the cutter from the collet. Verify collet size matches the 1\/4-inch shank diameter before tightening. Handle carbide tooling with care to avoid chipping the tip, as solid carbide is brittle under impact or improper clamping force.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 0.009 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Diameter\u003c\/strong\u003e: 0.009 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Shape\u003c\/strong\u003e: Conical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.447 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Submicron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SCIENTIFIC CUTTING TOOLS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: EN250-30\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SCIENTIFIC CUTTING TOOLS","offers":[{"title":"Default Title","offer_id":52090241319218,"sku":"EN250-30","price":46.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0818e521d574beaba19f0e0f2fc60f63.jpg?v=1790062310","url":"https:\/\/voomisupply.com\/products\/scientific-cutting-tools-en250-30-engraving-cutter","provider":"Voomi Supply","version":"1.0","type":"link"}