{"product_id":"scientific-cutting-tools-6149-m22x1-5-id-porting-tool-reamer","title":"Scientific Cutting Tools 6149-M22X1.5-ID Porting Tool Reamer","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SCIENTIFIC CUTTING TOOLS 6149-M22X1.5-ID is a porting tool reamer designed to machine O-ring boss (ORB) port faces to the precise dimensional requirements of ISO 6149-1 and SAE J2244-1 standards. It produces a flat spotface and pilot bore at M22x1.5 metric fine threaded ports, creating the seating surface needed for proper O-ring seal engagement. The tool features 4 straight flutes, a bright finish, and a 15-degree seal angle. Machinists, hydraulic system technicians, and fluid power specialists use this tool when preparing or refacing ports on manifolds, valve bodies, and hydraulic components where leak-free O-ring boss connections are required.\u003c\/p\u003e\n\u003cp\u003eThis reamer is suited for port preparation work on hydraulic and pneumatic manifolds, cylinders, valve blocks, and similar fluid power components that use M22x1.5 metric fine ORB ports. It is applied in both production machining environments and field or shop repair situations where an existing port face must be refaced to restore proper O-ring seating geometry. The identification groove confirms correct tool selection at the point of use. A 3\/4-inch shank diameter allows mounting in standard collet chucks, end mill holders, or drill press spindles.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSpotface diameter of 1.3425 inches (34.10 mm) conforms to ISO 6149-1 and SAE J2244-1 port geometry requirements\u003c\/li\u003e\n  \u003cli\u003eReamer pilot type with minimum pilot diameter of 0.8071 inches (20.50 mm) and maximum pilot diameter of 0.9390 inches for precise bore engagement\u003c\/li\u003e\n  \u003cli\u003e15-degree seal angle machines the correct O-ring boss seat geometry for leak-free connections\u003c\/li\u003e\n  \u003cli\u003e4 straight flutes with bright finish for clean, accurate cutting on steel and similar materials\u003c\/li\u003e\n  \u003cli\u003eIdentification groove for fast, reliable tool verification before use\u003c\/li\u003e\n  \u003cli\u003e3\/4-inch shank diameter compatible with standard machine toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on M22x1.5 metric fine O-ring boss ports conforming to ISO 6149-1 and SAE J2244-1 standards. Suitable for port preparation and refacing on hydraulic manifolds, valve bodies, cylinders, and fluid power components that use this port thread size and standard.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tool is intended for use by machinists or hydraulic technicians in a machine shop or controlled maintenance environment. Always depressurize and isolate any hydraulic or pneumatic system completely before performing port work. Secure the tool in a rigid, properly sized toolholder to prevent runout, which can compromise spotface geometry and O-ring sealing. Verify port thread size and standard compliance before selecting and applying the tool.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpotface Diameter\u003c\/strong\u003e: 1.3425 inches (34.10 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePort Thread Size\u003c\/strong\u003e: M22x1.5 Metric Fine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePilot Type\u003c\/strong\u003e: Reamer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Pilot Diameter\u003c\/strong\u003e: 0.8071 inches (20.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Pilot Diameter\u003c\/strong\u003e: 0.9390 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePilot Length\u003c\/strong\u003e: 0.6102 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.8000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.6800 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2.1200 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeal Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIdentification Groove\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO 6149-1, SAE J2244-1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.75 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SCIENTIFIC CUTTING TOOLS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6149-M22X1.5-ID\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SCIENTIFIC CUTTING TOOLS","offers":[{"title":"Default Title","offer_id":67948527059250,"sku":"6149-M22X1.5-ID","price":403.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/288162a20bf4f48107c4f6c3efcf475b_3c4dc3c3-c4a6-4b50-b67c-fe8bc7327d3a.jpg?v=1791666096","url":"https:\/\/voomisupply.com\/products\/scientific-cutting-tools-6149-m22x1-5-id-porting-tool-reamer","provider":"Voomi Supply","version":"1.0","type":"link"}