{"product_id":"sandvik-coromant-8036807-corner-radius-end-mill-5-flute","title":"Sandvik Coromant 8036807 Corner Radius End Mill 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 8036807 is a solid carbide corner radius end mill from the CoroMill Dura series, designed for high-performance milling in demanding materials. It features a 11.13 mm (0.438 inch) cutting diameter and a 0.09 inch corner radius that reduces stress concentration at the cutting edge and extends tool life. The AlTiN coating provides heat and wear resistance, making this cutter well suited for aggressive cuts in hardened steels, stainless steels, and similar difficult-to-machine alloys. With 5 flutes, a variable helix, and a variable index design, it delivers improved chip evacuation and reduced chatter. This tool is installed by machinists and toolroom professionals working on CNC machining centers and manual mills.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in precision milling applications where edge integrity and surface finish are critical. The single-end, centercutting geometry allows for both plunge and side milling operations. The straight-cylindrical shank at 0.438 inch diameter fits standard ER collet chucks and end mill holders. The right-hand flute direction and right-hand cutting direction conform to conventional CNC milling setups. It is suited for slot milling, profiling, and finishing passes in aerospace, die and mold, and general machining environments. Material grade X1BH indicates suitability for ISO-P and ISO-K workpiece materials at elevated cutting parameters.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating extends tool life in high-heat cutting conditions\u003c\/li\u003e\n  \u003cli\u003eVariable helix and variable index design reduces vibration and chatter\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry enables plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003e5-flute configuration improves surface finish and material removal rate\u003c\/li\u003e\n  \u003cli\u003eCoroMill Dura series, material grade X1BH for consistent performance in steel and cast iron\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eThis tool belongs to the SANDVIK COROMANT CoroMill Dura series with material grade X1BH. It is designed for use in standard straight-bore end mill holders and ER collet systems accepting a 0.438 inch shank diameter. Consult SANDVIK COROMANT tooling catalogs for verified holder and adapter pairings.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by qualified machinists with the spindle fully stopped and the machine in a locked-out, de-energized state per applicable OSHA lockout\/tagout procedures. Use a torque wrench and manufacturer-specified collet or holder to secure the shank — do not overtighten or use worn holders, as this affects runout and tool life. Inspect the cutting edges under magnification before each use and discard any tool showing chipping or edge breakdown. Always verify spindle speed, feed rate, and depth of cut against the SANDVIK COROMANT published cutting data for this grade and coating before running production.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter (mm)\u003c\/strong\u003e: 11.13 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter (Inch)\u003c\/strong\u003e: 0.438 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.09 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.438 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: X1BH\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroMill Dura\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 3.15 inches L x 0.71 inches W x 0.71 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.18 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 8036807\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51744643842354,"sku":"8036807","price":151.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0f91e34b94b1b4fc5b1a76700f732106_a0252453-f2e4-48e4-85df-04202f1ec7bf.jpg?v=1788859401","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-8036807-corner-radius-end-mill-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}