{"product_id":"sandvik-coromant-8036787-square-end-mill-0-375in-5-flute","title":"Sandvik Coromant 8036787 Square End Mill 0.375in 5 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 8036787 is a solid carbide square end mill from the CoroMill Dura series, designed for high-performance milling in demanding metal-cutting applications. It features a 0.375 inch diameter with a 1 inch length of cut, a 0.375 inch shank diameter, and a 2.5 inch overall length. The AlTiN coating provides heat and wear resistance, extending tool life in hard and abrasive materials. Five flutes with a variable helix and variable index geometry reduce chatter and improve chip evacuation. This end mill is right-hand cut with right-hand flute direction and is center-cutting, allowing plunge entry. It is intended for use by machinists and CNC tool specialists in precision machining environments.\u003c\/p\u003e\u003cp\u003eThe 8036787 is suited for milling ferrous metals, hardened steels, and similar materials where AlTiN coating and solid carbide construction provide measurable tool life advantages. Its variable helix and variable index design make it well suited for finishing and semi-finishing passes where vibration control is critical. The CoroMill Dura series targets high-material-removal-rate applications in both production shop and job shop settings. Typical use cases include profiling, slotting, and side milling on vertical machining centers and CNC mills.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in hard materials\u003c\/li\u003e\n\u003cli\u003eAlTiN coating for high-temperature and abrasion resistance\u003c\/li\u003e\n\u003cli\u003eFive-flute design increases feed rates compared to three- or four-flute alternatives\u003c\/li\u003e\n\u003cli\u003eVariable helix and variable index geometry reduce vibration and chatter\u003c\/li\u003e\n\u003cli\u003eCenter-cutting capable — supports direct plunge entry\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard CNC mill spindle use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003ePart of the SANDVIK COROMANT CoroMill Dura series. Designed as a direct-fit solid carbide square end mill for standard 3\/8 inch collet or end mill holders on CNC vertical machining centers and manual mills.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Use a properly sized collet or end mill holder rated for the 0.375 inch shank diameter and torque the retention mechanism per the tool holder manufacturer's specifications. Verify runout with a dial indicator after installation before initiating a cutting program.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: X1BH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroMill Dura\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.12 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 8036787\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51727758950706,"sku":"8036787","price":124.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0f91e34b94b1b4fc5b1a76700f732106_d64e8e5f-d671-4865-bb6d-703265788569.jpg?v=1788681854","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-8036787-square-end-mill-0-375in-5-flute","provider":"Voomi Supply","version":"1.0","type":"link"}