{"product_id":"sandvik-coromant-7611827-square-end-mill-head-3-8-in","title":"Sandvik Coromant 7611827 Square End Mill Head 3\/8 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 7611827 is a solid carbide square end mill head designed for precision milling in demanding machining environments. This 4-flute head measures 3\/8 inch (0.375 inches) in mill diameter with a 0.2087-inch length of cut and 0.2087-inch overall length. It features an E10 modular connection for use in compatible CoroMill 316 series tooling systems. The AlTiN finish coating improves heat resistance and extends tool life in high-speed cutting applications. The 50-degree helix angle promotes efficient chip evacuation, and the right-hand flute and cutting direction suit standard CNC milling setups. This head is installed by machinists and CNC tooling technicians in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThe 7611827 is suited for milling operations in aerospace, die and mold, and general metalworking applications. Its center-cutting geometry allows it to plunge directly into workpiece material without a pre-drilled entry point. The CoroMill 316 series modular system enables quick head changes without removing the entire tool assembly from the spindle, reducing setup time in high-mix production environments. Manufacturer grade 1730 solid carbide construction supports use in a range of ferrous and non-ferrous materials at elevated cutting parameters.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e3\/8 inch mill diameter with 0.2087 inches length of cut\u003c\/li\u003e\n  \u003cli\u003e4-flute square end geometry for stable, high-feed milling\u003c\/li\u003e\n  \u003cli\u003eSolid carbide grade 1730 construction for wear resistance\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating for elevated heat resistance in high-speed applications\u003c\/li\u003e\n  \u003cli\u003e50-degree helix angle promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eE10 modular connection compatible with CoroMill 316 series toolholders\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge entry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with CoroMill 316 series modular milling systems utilizing an E10 connection interface.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis end mill head is installed by qualified machinists or CNC tooling technicians. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. The E10 modular connection should be seated and torqued per the toolholder manufacturer specifications using the appropriate wrench. Inspect the connection interface and head seating surface for contamination or wear before installation to ensure runout is within acceptable limits.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter (Fractional)\u003c\/strong\u003e: 3\/8 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter (Decimal)\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.2087 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.2087 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 50 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: E10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1730\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish Coating\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroMill 316\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.24 inches L x 2.16 inches W x 0.87 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7611827\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51750553223474,"sku":"7611827","price":143.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5fe5a752f3bdd3715d93c5e6b146f5cc_324f4519-78df-460c-a7ec-c4d01f91a9f7.jpg?v=1788916610","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-7611827-square-end-mill-head-3-8-in","provider":"Voomi Supply","version":"1.0","type":"link"}