{"product_id":"sandvik-coromant-7358083-replaceable-tip-drill-22-23mm","title":"Sandvik Coromant 7358083 Replaceable Tip Drill 22.23mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 7358083 is a carbide replaceable tip drill designed for precision hole-making in metalworking applications. Part of the CoroDrill 870 series, this drill uses a solid carbide tip with a PM insert geometry and a TiAlN coating applied via PVD process. The 22.23mm (0.8752 inch) cutting diameter and 142-degree included angle make it well suited for high-accuracy drilling in steel, stainless steel, and cast materials. The replaceable tip design reduces tooling cost per hole by allowing the insert to be swapped without discarding the shank body. Licensed machinists and CNC operators working in production environments are the primary users of this tool.\u003c\/p\u003e\n\u003cp\u003eThis drill tip is used in CNC machining centers and turning centers where consistent hole diameter and finish are required. The CoroDrill 870 platform is a modular system that pairs replaceable carbide tips with steel or carbide shanks, making it a common choice in high-volume production shops running repeat drilling cycles. The insert seat size is 22, matching the corresponding 870-series shank. Coolant-through capability is not included in this configuration, so external coolant or air blast is the recommended approach for chip evacuation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide tip with TiAlN coating for wear resistance in ferrous materials\u003c\/li\u003e\n  \u003cli\u003ePVD coating process preserves sharp cutting edges and tight tolerances\u003c\/li\u003e\n  \u003cli\u003ePM insert geometry optimized for reliable chip formation\u003c\/li\u003e\n  \u003cli\u003e142-degree included angle suited for flat-bottom entry and standard drilling\u003c\/li\u003e\n  \u003cli\u003eReplaceable tip design reduces tooling cost compared to solid drill replacement\u003c\/li\u003e\n  \u003cli\u003eInsert seat size 22 for direct compatibility with the CoroDrill 870 shank platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SANDVIK COROMANT CoroDrill 870 series shanks with insert seat size 22. Verify shank seat size and series designation before ordering to confirm tip-to-body fit.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist or CNC tooling technician with the machine in a safe, powered-down or tool-change state. Use the manufacturer-specified torque wrench and drive key when seating the replaceable tip to avoid over-torquing the tip screw. Inspect the insert seat for chips or debris before mounting a new tip, as a contaminated seat will affect runout and hole quality. Follow the toolholder manufacturer guidelines for recommended cutting parameters when setting up for a new run.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 22.23mm (0.8752 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 142 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 4334\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: PM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 22\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroDrill 870\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 5.51 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 13.78 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 12.6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.066 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7358083\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51753083273522,"sku":"7358083","price":260.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a1c60e42b88dae248ccf037a21b2e074_7fffc685-981c-4281-b152-a6fafb104807.jpg?v=1788932642","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-7358083-replaceable-tip-drill-22-23mm","provider":"Voomi Supply","version":"1.0","type":"link"}