{"product_id":"sandvik-coromant-7254452-square-end-mill-3-8in-6-flute","title":"Sandvik Coromant 7254452 Square End Mill 3\/8in 6 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 7254452 is a 6-flute solid carbide square end mill from the CoroMill Plura series, designed for high-performance milling in demanding machining environments. It carries a diamond coating and a 40-degree helix angle, making it well-suited for cutting non-ferrous materials, composites, and abrasive workpiece materials. The mill diameter is 3\/8 inches with a matching 3\/8-inch shank diameter, an overall length of 3 inches, and a length of cut of 1.1221 inches. Right-hand cutting and right-hand flute direction are standard. Centercutting capability allows for direct plunge entry. This tool is installed by machinists and CNC operators working in precision production environments.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use in CNC machining centers and manual milling machines where tight tolerances and consistent surface finish are required. The CoroMill Plura series targets applications involving graphite, carbon fiber reinforced polymers, aluminum, and other abrasive or sticky materials where a diamond coating extends tool life significantly. Single-end construction means the tool is replaced rather than indexed when worn. Material grade O12M is specified by SANDVIK COROMANT for this configuration.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e6-flute geometry increases feed rates and improves surface finish in finishing passes\u003c\/li\u003e\n  \u003cli\u003eDiamond coating provides exceptional wear resistance in abrasive and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003e40-degree helix angle promotes smooth cutting action and efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting design supports direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction delivers rigidity and dimensional stability under cutting loads\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand spiral, single-end configuration for standard CNC spindle use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style cutting tool for use in CNC machining centers and milling machines accepting a 3\/8-inch straight shank, within the SANDVIK COROMANT CoroMill Plura series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator. Secure the shank in a collet or end mill holder rated for the shank diameter before powering the spindle. Verify runout with a dial indicator after installation to confirm proper seating. Do not exceed the tool manufacturer's recommended speeds and feeds for the specified coating and workpiece material.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inches (0.375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.1221 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches (0.375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 40 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Diamond\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: O12M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroMill Plura\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1408 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7254452\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51740919955762,"sku":"7254452","price":376.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8c278bfe533d5f6e81c2a7d4861510e5_72da0529-172c-4da5-bee7-b9a6ffec3661.jpg?v=1788828333","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-7254452-square-end-mill-3-8in-6-flute","provider":"Voomi Supply","version":"1.0","type":"link"}