{"product_id":"sandvik-coromant-7231367-turning-insert-dcmt-coroturn-107","title":"Sandvik Coromant 7231367 Turning Insert Dcmt Coroturn 107","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 7231367 is a DCMT-style indexable turning insert designed for precision external turning operations. Built from solid carbide and coated via CVD with a TiCN, Al2O3, and TiN multilayer stack, this insert delivers wear resistance and thermal stability across a wide range of cutting conditions. It carries a 55-degree diamond shape, a 3\/8-inch inscribed circle (0.375 inches), a 5\/32-inch thickness (0.1563 inches), and a 1\/64-inch corner radius (0.0156 inches). Neutral hand orientation makes it suitable for straightforward external turning setups. Licensed machinists and CNC lathe operators install this insert as part of the CoroTurn 107 tooling system.\u003c\/p\u003e\n\u003cp\u003eThe 7231367 is engineered for turning stainless steel as its primary workpiece material, where the CVD-applied TiCN and Al2O3 layers resist built-up edge and crater wear under continuous and interrupted cuts. The UM chip breaker geometry promotes effective chip control in medium to light finishing passes on austenitic and duplex stainless grades. With two cutting edges per insert, it provides a cost-effective indexing interval for production turning environments. The insert mates with CoroTurn 107 screw-clamp holders that accept the DCMT insert pocket geometry with a 7-degree relief angle and a C clearance code.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCVD multilayer coating: TiCN, Al2O3, and TiN for thermal and abrasion resistance\u003c\/li\u003e\n  \u003cli\u003e55-degree diamond insert shape with 7-degree relief angle for positive cutting geometry\u003c\/li\u003e\n  \u003cli\u003eUM chip breaker optimized for light-to-medium finishing on stainless steel\u003c\/li\u003e\n  \u003cli\u003eTwo cutting edges per insert for extended tool life per piece\u003c\/li\u003e\n  \u003cli\u003eScrew-clamp holding method for secure, repeatable seating in CoroTurn 107 holders\u003c\/li\u003e\n  \u003cli\u003eISO code DCMT 11 T3 04-UM 2220 for cross-reference sourcing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in SANDVIK COROMANT CoroTurn 107 series screw-clamp turning holders accepting DCMT insert geometry. ISO designation DCMT 11 T3 04-UM 2220 can be used to identify compatible third-party holders with matching DCMT pocket specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified CNC machinists or manual lathe operators. Power down and lock out the machine spindle before indexing or replacing inserts. Use the correct Torx or hex key per the holder manufacturer's specification to seat the clamping screw — do not overtighten, as this can crack the insert or distort the pocket. Inspect the insert pocket and shim for debris or damage before seating a new insert edge.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: DCMT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: 55-degree Diamond\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 3\/8 inch (0.375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 5\/32 inch (0.1563 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 1\/64 inch (0.0156 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN, Al2O3, TiN (CVD process)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 2220\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: UM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHolding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: C\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1732 inches (4.40 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroTurn 107\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: DCMT 11 T3 04-UM 2220\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 7231367\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51731700908338,"sku":"7231367","price":238.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7ffa7acc3099f1735ea6ad3014474678.jpg?v=1788734039","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-7231367-turning-insert-dcmt-coroturn-107","provider":"Voomi Supply","version":"1.0","type":"link"}