{"product_id":"sandvik-coromant-6532097-grooving-insert-corocut-1-2-8mm","title":"Sandvik Coromant 6532097 Grooving Insert Corocut 1-2 8mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 6532097 is a solid carbide grooving insert designed for external and internal grooving operations on CNC lathes and turning centers. It carries the ISO designation N123L2-0800-0005-GM 4325 and belongs to the CoroCut 1-2 series. The insert features a multi-layer MT-CVD coating of TiCN, Al2O3, and TiN, which provides wear resistance and thermal stability during continuous and interrupted cut grooving. With an 8 mm cutting width, a maximum depth of cut of 28.40 mm, and a neutral hand orientation, this insert suits a wide range of grooving applications where consistent chip control is required. It is installed and used by CNC machinists and toolroom technicians working in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for grooving steel, stainless steel, and similar workpiece materials where grade 4325 carbide excels. The GM chip breaker geometry promotes reliable chip evacuation in medium-depth groove cutting. It fits CoroCut 1-2 toolholders that accept the L insert seat size. The neutral rake angle of 7 degrees and a 0.50 mm corner radius make it a practical choice for standard external grooving, parting-adjacent operations, and recessing tasks in both production and low-volume precision work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e8 mm cutting width with a maximum depth of cut of 28.40 mm for medium to deep groove profiles\u003c\/li\u003e\n  \u003cli\u003eMT-CVD multi-layer TiCN, Al2O3, and TiN coating for elevated wear and heat resistance\u003c\/li\u003e\n  \u003cli\u003eGM chip breaker geometry for controlled chip formation and evacuation\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation — compatible with both left- and right-side grooving setups depending on holder configuration\u003c\/li\u003e\n  \u003cli\u003eGrade 4325 solid carbide substrate balances toughness and hardness for steel and stainless applications\u003c\/li\u003e\n  \u003cli\u003e0.50 mm corner radius minimizes stress concentration at groove edges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SANDVIK COROMANT CoroCut 1-2 series toolholders accepting the L insert seat size. ISO code N123L2-0800-0005-GM 4325 identifies the exact holder-to-insert interface. Verify toolholder seat size and clamping style before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert installation and replacement should be performed by a qualified CNC machinist or toolroom technician with the machine in a fully stopped and locked-out state. Use the correct Torx or hex key specified by the toolholder manufacturer when seating and torquing the clamping screw — do not over-tighten or substitute fasteners. Inspect the insert pocket and clamping components for wear or debris before seating a new insert. Handle carbide inserts with care to avoid chipping the cutting edge prior to use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 8 mm (0.3150 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 28.40 mm (1.1181 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.50 mm (0.0197 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 6.05 mm (0.2382 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.1583 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 0.3150 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.2382 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 4325\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: MT-CVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Finish\u003c\/strong\u003e: TiCN, Al2O3, TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: GM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: L\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroCut 1-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: N123L2-0800-0005-GM 4325\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5.83 inches (L) x 2.36 inches (W) x 0.71 inches (H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.52 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6532097\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51733370962226,"sku":"6532097","price":1081.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/71d6ba73c5be1bb741610698a71cfb66_d5395fc6-a4a1-4c8c-a7dc-294b0f311214.jpg?v=1788754811","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-6532097-grooving-insert-corocut-1-2-8mm","provider":"Voomi Supply","version":"1.0","type":"link"}