{"product_id":"sandvik-coromant-6199379-grooving-insert-corocut-1-2","title":"Sandvik Coromant 6199379 Grooving Insert Corocut 1-2","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 6199379 is a solid carbide grooving insert designed for precise parting and grooving operations on CNC lathes and turning centers. Part of the CoroCut 1-2 series, it features a TiAlN2 coating applied via PVD process, which provides heat resistance and extended tool life in demanding cuts. The insert has a cutting width of 4 millimeters and a maximum depth of cut of 1.8 millimeters, making it well suited for shallow groove profiles. With a manufacturer grade of 1105 and a 7-degree rake angle, it delivers consistent chip control in production turning environments. Licensed machinists and CNC operators are the typical end users for this tooling consumable.\u003c\/p\u003e\u003cp\u003eThis insert fits lathe and turning center applications where repeatable groove geometry and surface finish are critical. It is appropriate for both ferrous and non-ferrous workpiece materials when matched to the correct cutting parameters. The neutral hand orientation allows use in standard straight-cut grooving setups. The CoroCut 1-2 series is a widely used platform in production shops running medium to high volume turned components. The insert size designation is 0400, and the corner radius measures 2 millimeters.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide substrate with PVD-applied TiAlN2 coating for wear resistance\u003c\/li\u003e\n\u003cli\u003e4 millimeter cutting width with a maximum depth of cut of 1.8 millimeters\u003c\/li\u003e\n\u003cli\u003eNeutral hand orientation for standard grooving configurations\u003c\/li\u003e\n\u003cli\u003e7-degree rake angle for effective chip formation and reduced cutting forces\u003c\/li\u003e\n\u003cli\u003e2 millimeter corner radius for smooth groove profile transitions\u003c\/li\u003e\n\u003cli\u003ePart of the CoroCut 1-2 tooling system for broad holder compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with SANDVIK COROMANT CoroCut 1-2 series toolholders that accept the N123 insert style with a 0400 insert size designation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert seating and clamping should be performed by a qualified CNC machinist or tooling technician with the machine in a full stop, locked-out state. Inspect the insert pocket for chips or debris before seating the new insert, and verify clamp torque using the toolholder manufacturer's recommended procedure. Never exceed the maximum depth of cut specification for the insert. Refer to the applicable cutting data tables for speed and feed recommendations based on workpiece material.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: N123\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroCut 1-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 4 millimeters (0.1575 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 1.8 millimeters (0.0709 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 2 millimeters (0.0787 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: 0400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5.08 inches L x 2.13 inches W x 0.53 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.19 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6199379\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51728541483314,"sku":"6199379","price":487.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8d07592b61112459e4427188a9f99614.jpg?v=1788693001","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-6199379-grooving-insert-corocut-1-2","provider":"Voomi Supply","version":"1.0","type":"link"}