{"product_id":"sandvik-coromant-5765348-indexable-insert-drill-31mm","title":"Sandvik Coromant 5765348 Indexable Insert Drill 31mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5765348 is an indexable insert drill from the CoroDrill 880 series, designed for high-productivity drilling operations in metalworking and machining applications. The drill accepts two indexable inserts and delivers a maximum drill depth of 3.80787 inches at a 3xD depth-to-diameter ratio. The 31mm (1.2984 inches) cutting diameter and Capto C5 modular connection make this tool compatible with CNC machining centers and turning centers equipped with matching Capto interfaces. The steel body provides rigidity during high-feed drilling, and the through-coolant capability supports chip evacuation and tool life at elevated cutting parameters. Licensed machinists and CNC programmers typically specify this tool for production drilling in steel, cast iron, and similar workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThe 5765348 is suited for use on CNC machining centers and mill-turn platforms running production or job-shop drilling cycles in ferrous and non-ferrous materials. The modular Capto C5 connection allows rapid tool changes and precise repeatability in systems configured for quick-change tooling. At a 3xD depth-to-diameter ratio, this drill is best applied to through-holes and blind holes where depth does not exceed approximately 3.80 inches. The right-hand cutting direction is standard for conventional spindle rotation. This configuration is used in aerospace, automotive, and general engineering environments where consistent hole quality and insert interchangeability are priorities.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e31mm (1.2984 inches) maximum drill diameter for precision bore sizing\u003c\/li\u003e\n  \u003cli\u003e3xD depth-to-diameter ratio with a maximum drill depth of 3.80787 inches\u003c\/li\u003e\n  \u003cli\u003eCapto C5 modular connection for repeatable, quick-change tool setup\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant capable to support chip evacuation and extended insert life\u003c\/li\u003e\n  \u003cli\u003eAccepts 2 indexable inserts compatible with CoroDrill 880 Cx-03 drill style\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction; steel body construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with the CoroDrill 880 Cx-03 drill style and accepts inserts sized 3.50mm (0.1378 inches). Requires a Capto C5 modular connection interface on the machine spindle or toolholder. Compatible insert and adapter selection should be verified against the CoroDrill 880 series tooling system.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and setup should be performed by a qualified machinist or CNC tooling technician. Ensure the machine spindle is fully stopped and the control is in a safe state before mounting or removing the tool assembly. Verify Capto C5 interface cleanliness and seating torque per the machine tool manufacturer specifications before running. Activate through-coolant supply and confirm chip evacuation before engaging the drill at full feed parameters.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Diameter\u003c\/strong\u003e: 31mm (1.2984 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drill Depth\u003c\/strong\u003e: 3.80787 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Depth by Diameter Ratio\u003c\/strong\u003e: 3xD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Modular Connection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eModular Connection Size\u003c\/strong\u003e: Capto C5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 50mm (1.9685 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.2046 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 115.20mm (4.5354 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Length\u003c\/strong\u003e: 97.00mm (3.8189 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Inserts\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: 3.50mm (0.1378 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Drill Style\u003c\/strong\u003e: 880..Cx-03\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.21 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23291503\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5765348\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51754288021810,"sku":"5765348","price":1381.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/da2d2689eefe346bac6dc0d3bfec5efe_11990dec-b13d-47c5-b4a6-9be40a708303.jpg?v=1788944269","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5765348-indexable-insert-drill-31mm","provider":"Voomi Supply","version":"1.0","type":"link"}