{"product_id":"sandvik-coromant-5755373-turning-insert-vbgt332-um-1115","title":"Sandvik Coromant 5755373 Turning Insert VBGT332-UM 1115","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5755373 is a solid carbide turning insert in the CoroTurn 107 series, designed for precision external and internal turning operations on CNC lathes. Identified by ISO code VBGT 16 04 08-UM 1115, this insert carries a TiAlN and AlCr2O3 PVD coating applied over a carbide substrate, delivering strong wear resistance and heat stability at the cutting edge. The VBGT geometry features a 35-degree diamond shape, a neutral hand orientation, and a UM chip breaker configuration. With a 3\/8-inch inscribed circle and a 1\/32-inch corner radius, it is sized for moderate depth-of-cut finish and semi-finish passes. Installation is performed by licensed machinists and CNC operators using screw-type insert clamping (Clearance Code B, Tolerance Code G).\u003c\/p\u003e\n\u003cp\u003eThis insert is engineered primarily for machining stainless steel (ISO material code M) with secondary capability on superalloys and titanium (ISO material code S). These material groups demand coatings and edge geometries that resist built-up edge and crater wear under interrupted or continuous cutting conditions. The CoroTurn 107 series is a widely deployed platform for positive-rake turning on small-to-medium bore and shaft work where precise chip control is required. Two cutting edges are available per insert, offering a straightforward flip-and-run workflow for maximizing tool cost efficiency in production environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTiAlN and AlCr2O3 PVD dual-layer coating for elevated heat and oxidation resistance\u003c\/li\u003e\n  \u003cli\u003e35-degree diamond insert shape (VBGT) with 5-degree relief angle for low cutting forces on difficult materials\u003c\/li\u003e\n  \u003cli\u003eUM chip breaker geometry optimized for stainless steel, superalloy, and titanium workpieces\u003c\/li\u003e\n  \u003cli\u003e1\/32-inch (0.0313-inch) corner radius suitable for finish and semi-finish turning passes\u003c\/li\u003e\n  \u003cli\u003eScrew-type insert holding for positive, repeatable seating in compatible CoroTurn 107 toolholders\u003c\/li\u003e\n  \u003cli\u003e2 usable cutting edges per insert for extended tool life per piece\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CoroTurn 107 series toolholders that accept VBGT-style inserts with a screw-clamp holding method. ISO code VBGT 16 04 08-UM 1115 identifies the exact seat and geometry requirements for toolholder selection.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert replacement and indexing should be performed by a qualified machinist with the machine spindle fully stopped and locked out per applicable shop safety procedures. Use the correct Torx or hex key to the toolholder manufacturer's specified clamping procedure for screw-retained inserts. Inspect the insert pocket seat for chips or debris before seating a new insert, as contamination affects repeatability and can damage the pocket. Do not exceed the recommended depth of cut or feed rate range for the 1115 grade when running stainless or superalloy workpieces.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: VBGT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: VBGT 16 04 08-UM 1115\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroTurn 107\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1115\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN and AlCr2O3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Diamond (35 degrees included angle)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: UM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.6223 inches (15.81 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 1\/32 inch (0.0313 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 5 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1732 inches (4.40 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel (ISO Code M)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Superalloy and Titanium (ISO Code S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.24 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5755373\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51742945149234,"sku":"5755373","price":636.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fc71ace956d48e72194f20f1c2b7ad09_b768c404-dcd8-4ebe-acb1-4ab61c305efa.jpg?v=1788840619","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5755373-turning-insert-vbgt332-um-1115","provider":"Voomi Supply","version":"1.0","type":"link"}