{"product_id":"sandvik-coromant-5750070-turning-insert-snmg543-qm-h13a","title":"Sandvik Coromant 5750070 Turning Insert SNMG543-QM H13A","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5750070 is an uncoated solid carbide turning insert designed for precision metal-cutting operations on CNC and manual lathes. It carries the SNMG 15 06 12-QM H13A ISO designation, featuring a 90-degree square shape with a 0-degree relief angle and a QM chip breaker geometry suited for medium machining applications. The inscribed circle measures 5\/8 inch (0.625 inch), insert length is approximately 0.578 inch, and the corner radius is 3\/64 inch (0.047 inch). The H13A uncoated carbide grade delivers sharp, consistent cutting edges. Licensed machinists and CNC operators install this insert in compatible indexable toolholders as part of routine cutting-edge replacement cycles.\u003c\/p\u003e\n\u003cp\u003eThis insert is used in turning operations on CNC machining centers and engine lathes across general-purpose and medium-duty applications. The SNMG insert style is a widely adopted geometry in both production and job-shop environments. It is held in the toolholder by clamp and pin, providing positive location and repeatable edge positioning. Typical materials machined with uncoated H13A carbide include cast iron and certain non-ferrous alloys where a bright, uncoated edge is preferred for clean chip formation and surface finish.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSNMG insert style with 90-degree square shape and 0-degree relief angle for negative rake toolholder compatibility\u003c\/li\u003e\n  \u003cli\u003eH13A uncoated solid carbide grade with bright finish for sharp cutting-edge performance\u003c\/li\u003e\n  \u003cli\u003eQM chip breaker geometry designed for medium turning applications\u003c\/li\u003e\n  \u003cli\u003e3\/64 inch corner radius (0.047 inch) for controlled nose geometry and surface finish\u003c\/li\u003e\n  \u003cli\u003eClamp and pin holding method for secure, repeatable seating in the toolholder pocket\u003c\/li\u003e\n  \u003cli\u003eISO code SNMG 15 06 12-QM H13A for direct cross-reference with toolholder specifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in SNMG-style indexable turning toolholders that accept a square insert with a 5\/8 inch inscribed circle and 1\/4 inch insert thickness. Verify toolholder pocket specifications against the ISO designation SNMG 15 06 12-QM H13A before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis insert is installed and indexed by qualified machinists or CNC tooling technicians. Power down and lock out the machine spindle before changing inserts. Use the appropriate torx or hex key specified by the toolholder manufacturer to secure the clamp; do not overtighten. Inspect the toolholder pocket and locating pin for wear or debris before seating a new insert to ensure proper edge geometry and safe cutting conditions.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: SNMG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: SNMG 15 06 12-QM H13A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: Square (90 degree included angle)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: H13A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: QM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 5\/8 inch (0.625 inch \/ 15.88 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 5\/8 inch (0.578 inch \/ 14.68 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 1\/4 inch (0.250 inch \/ 6.35 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 3\/64 inch (0.047 inch \/ 1.19 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.250 inch (6.35 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degree\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 543\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.51 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5.08 inches (L) x 2.13 inches (W) x 0.53 inches (H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 insert per package\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5750070\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51736408588594,"sku":"5750070","price":332.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e627e452126a51c3b9e8e4420bef6d1a.jpg?v=1788777792","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5750070-turning-insert-snmg543-qm-h13a","provider":"Voomi Supply","version":"1.0","type":"link"}