{"product_id":"sandvik-coromant-5742547-corner-radius-end-mill-6mm-r215","title":"Sandvik Coromant 5742547 Corner Radius End Mill 6mm R215","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5742547 is a solid carbide corner radius end mill designed for high-performance milling in steel and hard materials. Part of the R215 series, this single-end tool features a 6 mm diameter with a 0.50 mm corner radius and a high 50-degree helix angle that supports aggressive chip evacuation during roughing operations. The cutting edges are finished with a PVD-applied TiAlN multilayer coating, which extends tool life in abrasive and elevated-temperature cutting conditions. With four right-hand flutes and a straight-cylindrical shank, it mounts directly into standard toolholders used on CNC machining centers.\u003c\/p\u003e\u003cp\u003eThis end mill is built for roughing applications in steel and hard material workpieces, classified under material codes P and H. The long-length geometry with a 0.20 mm length of cut and 57 mm overall length suits finishing passes along tight corner radii in dies, molds, and precision machined components. It is a non-centercutting design and does not support coolant-through delivery. Trade professionals in precision machining, tool and die, and aerospace component manufacturing will encounter this tool in CNC vertical and horizontal mill setups.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e6 mm diameter solid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003e0.50 mm corner radius end type reduces stress concentration at part corners\u003c\/li\u003e\n\u003cli\u003e50-degree high helix angle promotes efficient chip flow during roughing cuts\u003c\/li\u003e\n\u003cli\u003eTiAlN PVD multilayer coating extends tool life in steel and hard material applications\u003c\/li\u003e\n\u003cli\u003eFour right-hand flutes with normal pitch and spiral flute geometry\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank with h8 tolerance for consistent toolholder runout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard CNC toolholders. Optimized for steel and hard material workpiece applications per material codes P and H. Part of the SANDVIK COROMANT R215 series platform.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Power down and lock out the machine spindle before changing tooling. Secure the shank fully within the toolholder to the recommended gauge-line depth and verify runout with a dial indicator before beginning the cut. Do not use this tool for plunge cutting, as it is a non-centercutting design.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 6 mm (0.2362 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.50 mm (0.0197 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 57 mm (2.99 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 50 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter Tolerance\u003c\/strong\u003e: h9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter Tolerance\u003c\/strong\u003e: h8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN Multilayer (PVD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel and Hard Material (P and H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: R215\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 2.99 inches L x 0.87 inches W x 0.79 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5742547\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51730438390066,"sku":"5742547","price":217.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/974a5fa30f8abb40ccd20066045dac7d.jpg?v=1788717464","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5742547-corner-radius-end-mill-6mm-r215","provider":"Voomi Supply","version":"1.0","type":"link"}