{"product_id":"sandvik-coromant-5741382-grooving-insert-corocut-1-2","title":"Sandvik Coromant 5741382 Grooving Insert Corocut 1-2","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5741382 is a solid carbide grooving insert designed for precision external grooving and parting operations on CNC lathes and turning centers. Built to the CoroCut 1-2 series standard, it carries a TiAlN plus AlCr2O3 PVD coating applied through a physical vapor deposition process, delivering strong resistance to heat and wear during interrupted cuts and continuous grooving cycles. The insert features a 2 mm cutting width, a maximum depth of cut of 6 mm, and a 0.20 mm corner radius. Grade GS1115 is engineered for steel and stainless steel applications where edge stability and surface finish consistency are critical. Machinists and CNC operators working in job shops or production environments install this insert in compatible CoroCut 1-2 toolholders.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for grooving operations on turned components in both light and medium-duty production runs. The right-hand orientation and L1 insert seat size target standard CoroCut 1-2 toolholder configurations used in external grooving on shaft workpieces, rings, and flanges. The GS chip breaker geometry supports controlled chip formation across a range of feed rates. The insert is a multi-use tool capable of grooving, parting, and profiling depending on toolholder setup. It is a common choice in precision machining environments handling steel, stainless steel, and similar ISO P and M workpiece materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide substrate with GS1115 manufacturer grade for edge toughness in steel and stainless applications\u003c\/li\u003e\n  \u003cli\u003eTiAlN plus AlCr2O3 PVD coating for heat resistance and extended tool life\u003c\/li\u003e\n  \u003cli\u003e2 mm cutting width with 0.20 mm corner radius for precise groove geometry\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut of 6 mm; effective depth of cut range spans 5 mm to 10 mm\u003c\/li\u003e\n  \u003cli\u003eRight-hand orientation with L1 insert seat size for standard CoroCut 1-2 toolholder compatibility\u003c\/li\u003e\n  \u003cli\u003eGS chip breaker geometry promotes controlled chip evacuation during grooving and parting\u003c\/li\u003e\n  \u003cli\u003eMulti-use design supports grooving, parting, and profiling operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in SANDVIK COROMANT CoroCut 1-2 series toolholders accepting L1 seat size inserts with right-hand orientation. ISO code reference: RG123L102000002GS1115.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified CNC machinists or toolroom technicians. Shut down the machine spindle and confirm the turret is fully indexed and locked before seating or replacing inserts. Use the appropriate torx or insert clamping key specified for the CoroCut 1-2 toolholder to secure the insert without over-torquing the clamp screw. Verify insert seating and orientation visually before resuming operation, and confirm tool offset compensation is updated in the CNC controller after any insert change.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 2.00 mm (0.0787 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 6.00 mm (0.2362 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDepth of Cut Range\u003c\/strong\u003e: 5.00 mm to 10.00 mm (0.2000 to 0.3000 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 4.35 mm (0.1713 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: GS1115\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN; AlCr2O3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: RG123\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: L\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: L1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: GS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroCut 1-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: RG123L102000002GS1115\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-use Tool\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.32 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5741382\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51751195083058,"sku":"5741382","price":668.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/87936a5e80912ec709e3b0cee040941b_de8f7193-2016-4819-b25c-4b09f1483d1b.jpg?v=1788922175","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5741382-grooving-insert-corocut-1-2","provider":"Voomi Supply","version":"1.0","type":"link"}