{"product_id":"sandvik-coromant-5739907-square-shoulder-face-mill","title":"Sandvik Coromant 5739907 Square-shoulder Face Mill","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5739907 is an indexable square-shoulder face mill from the CoroMill 210 series, designed for precision milling operations in metalworking and machining environments. It accepts four R210-090412M inserts held by clamp and screw, and features through-coolant capability to manage heat at the cutting zone. The cutter has a maximum cutting diameter of 36.7mm (1.4449 inches), a maximum depth of cut of 1.2mm (0.0472 inches), and a 10-degree lead angle with a positive rake geometry. The arbor hole diameter is 3\/4 inch (19.05mm). This tool is installed and operated by machinists and CNC programmers working in close-pitch milling applications.\u003c\/p\u003e\u003cp\u003eThe 5739907 is suited for square-shoulder milling operations on a variety of workpiece materials where close-pitch insert arrangement and positive rake geometry are specified. The right-hand cutting direction and through-coolant design make it appropriate for use on CNC machining centers and manual mills equipped with coolant-through spindles or arbors. It is commonly used in production environments requiring consistent shoulder geometry and repeatable insert indexing.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCoroMill 210 series close-pitch design accepts 4 R210-090412M inserts\u003c\/li\u003e\n\u003cli\u003eThrough-coolant capability for thermal management at the cutting edge\u003c\/li\u003e\n\u003cli\u003e10-degree lead angle with positive rake for reduced cutting forces\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction; insert held by clamp and screw method\u003c\/li\u003e\n\u003cli\u003eKeyway width of 8.15mm (0.3209 inches) for secure arbor drive engagement\u003c\/li\u003e\n\u003cli\u003eSteel toolholder body for rigidity and durability in milling applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible insert style is R210-090412M. Cutter style is RA210. Designed for use with arbors or adapters accepting a 3\/4 inch (19.05mm) bore diameter within the CoroMill 210 system.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's setup procedures. Disconnect and lock out the machine before mounting or removing the cutter body. Verify arbor and keyway engagement before torquing the retention hardware. Confirm coolant-through path is clear and unobstructed before initiating a cutting cycle.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Cutting Diameter\u003c\/strong\u003e: 36.7mm (1.4449 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 1.2mm (0.0472 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArbor Hole Diameter\u003c\/strong\u003e: 3\/4 inch (19.05mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Height\u003c\/strong\u003e: 50.01mm (1.9690 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub Diameter\u003c\/strong\u003e: 19.05mm (3\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyway Width\u003c\/strong\u003e: 8.15mm (0.3209 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inserts\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 10 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: R210-090412M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Style\u003c\/strong\u003e: RA210\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch Type\u003c\/strong\u003e: Close\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroMill 210\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.55 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5739907\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51742982635826,"sku":"5739907","price":974.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/26908a0967101cb82b70666166cdb89c_8a129e05-45cf-495f-9900-d8fdf3bc3ec9.jpg?v=1788841213","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5739907-square-shoulder-face-mill","provider":"Voomi Supply","version":"1.0","type":"link"}