{"product_id":"sandvik-coromant-5737876-grooving-insert-solid-carbide","title":"Sandvik Coromant 5737876 Grooving Insert Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5737876 is a solid carbide grooving insert designed for precision parting and grooving operations on CNC lathes and turning centers. Part of the T-Max Q-Cut series, it carries a CVD-applied TiCN\/Al2O3\/TiN multilayer coating that improves wear resistance and extends tool life across a range of workpiece materials. The insert features a neutral hand orientation, a 0.315 inch (8.00 mm) cutting width, and a 0.50 mm corner radius. With a rake angle of 7 degrees and the 5G chip breaker geometry, it promotes controlled chip evacuation during grooving cuts. Machinists and CNC operators in production and job-shop environments install this insert into compatible T-Max Q-Cut toolholders.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for external grooving, face grooving, and parting applications on turning equipment. The N151.2 insert style fits into the corresponding T-Max Q-Cut insert seats sized for 80 mm seat designation. It is applicable to machining operations on steel, stainless steel, and similar materials where a CVD-coated solid carbide grade 2135 insert is specified. The 5G chip breaker geometry supports moderate to higher feed-rate grooving where chip control is a priority. This insert is sold individually per package, with a minimum order quantity of 10 units.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with CVD-applied TiCN\/Al2O3\/TiN multilayer coating for extended wear resistance\u003c\/li\u003e\n  \u003cli\u003e0.315 inch (8.00 mm) cutting width with 0.50 mm corner radius for consistent groove geometry\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation compatible with straight grooving and parting setups\u003c\/li\u003e\n  \u003cli\u003e5G chip breaker geometry promotes controlled chip formation at moderate to high feed rates\u003c\/li\u003e\n  \u003cli\u003e7-degree rake angle reduces cutting forces during groove entry\u003c\/li\u003e\n  \u003cli\u003ePart of the T-Max Q-Cut series for use with the corresponding indexed toolholder system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SANDVIK COROMANT T-Max Q-Cut series toolholders accepting the N151.2 insert style with an 80 mm insert seat size. Verify toolholder seat designation before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified CNC machinist or toolroom technician. Ensure the machine spindle is fully stopped and the turret is indexed to a safe position before changing inserts. Seat the insert fully against the insert pocket and tighten the clamping screw to the toolholder manufacturer's specified torque using the correct Torx or hex key. Inspect the insert seat for chips or debris before seating a new insert to prevent seating errors and premature insert failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: N151.2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-Max Q-Cut\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 2135\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\/Al2O3\/TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: CVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.315 inches (8.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0197 inches (0.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.4063 inches (10.32 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: 5G\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 80\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: N1512800805G2135\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.42 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5737876\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51732944879922,"sku":"5737876","price":541.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/806e622a2df56a6c264614d0c8acaf54_bc8dfa1f-23ba-4c91-9687-6198c5e31b80.jpg?v=1788749358","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5737876-grooving-insert-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}