{"product_id":"sandvik-coromant-5737074-cutoff-insert-3mm-t-max-q-cut","title":"Sandvik Coromant 5737074 Cutoff Insert 3mm T-max Q-cut","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5737074 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. Manufactured to insert style N151.2 with a 3.00 mm (0.1181 inch) cutting width, this insert carries a neutral lead angle and a 0-degree lead angle geometry, making it suited for straight-in cutoff work. The 2135 manufacturer grade features an MTCVD-applied TiCN\/Al2O3\/TiN multilayer coating for wear resistance and thermal stability. A licensed machinist or CNC operator installs this insert using the standard clamp-style holding method common to the T-Max Q-Cut toolholder family.\u003c\/p\u003e\u003cp\u003eThis insert is part of the T-Max Q-Cut series and fits applications where consistent, repeatable cutoff and grooving are required in production turning environments. The 4E chipbreaker geometry supports controlled chip formation during grooving cycles. With a 0.30 mm (0.0118 inch) corner radius and a 7-degree relief angle, the insert is well matched to moderate-depth parting cuts on ferrous and non-ferrous materials. It is appropriate for both high-volume production shops and job shops running precision turned components.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction with MTCVD TiCN\/Al2O3\/TiN multilayer coating for extended tool life\u003c\/li\u003e\n\u003cli\u003e3.00 mm cutting width (0.1181 inch) with neutral hand and neutral lead angle for straight-in cutoff\u003c\/li\u003e\n\u003cli\u003e4E chipbreaker for controlled chip evacuation during grooving and parting operations\u003c\/li\u003e\n\u003cli\u003e7-degree relief angle and 0.30 mm corner radius for clean, accurate groove geometry\u003c\/li\u003e\n\u003cli\u003eInsert style N151.2 with clamp-style holding method for secure, repeatable seating\u003c\/li\u003e\n\u003cli\u003eT-Max Q-Cut series compatibility for use with the corresponding toolholder family\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with T-Max Q-Cut series toolholders accepting insert style N151.2 with insert seat size 30. Refer to the toolholder specification to confirm correct seat size and clamping method before ordering.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert replacement should be performed by a qualified machinist or CNC technician with the machine in a locked-out, zero-energy state per applicable machine guarding and lockout\/tagout procedures. Use the correct clamp screw torque as specified in the toolholder documentation — do not rely on feel alone when seating carbide inserts. Inspect the insert pocket and clamping screw for wear or contamination before installing a new insert. Always verify insert orientation and confirm the chipbreaker side faces the correct direction for the intended cut before resuming operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: N151.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 2135\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.00 mm (0.1181 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees, Neutral Direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7.00 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.30 mm (0.0118 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: 4E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: MTCVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiCN\/Al2O3\/TiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.46 mm (0.2150 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 3.00 mm (0.1181 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-Max Q-Cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5737074\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51737090621746,"sku":"5737074","price":344.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/396488a3ed95c8f623ec6ee6c4b312a3_3d40be25-486a-4a20-a539-989ecf875927.jpg?v=1788784109","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5737074-cutoff-insert-3mm-t-max-q-cut","provider":"Voomi Supply","version":"1.0","type":"link"}