{"product_id":"sandvik-coromant-5737062-cutoff-insert-3mm-t-max-q-cut","title":"Sandvik Coromant 5737062 Cutoff Insert 3mm T-max Q-cut","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5737062 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. Manufactured to the N151.2 insert style with a 3.00 mm (0.1181 inch) cutting width, this insert carries the H13A carbide grade and a 5E chipbreaker geometry. The bright, uncoated finish is suited for applications where coating would alter edge precision or where cutting fluid provides adequate lubrication. A 7-degree relief angle and a 0.20 mm corner radius (0.0079 inch) contribute to clean parting cuts with controlled chip formation. Licensed machinists and CNC operators in metalworking shops install this insert as a direct replacement in compatible T-Max Q-Cut toolholders.\u003c\/p\u003e\u003cp\u003eThis insert is part of the SANDVIK COROMANT T-Max Q-Cut series, which is widely used in precision turning applications across general machining, automotive component manufacturing, and aerospace part production. The neutral lead angle and neutral hand designation make it appropriate for straight parting operations without lateral cutting forces. It is a single-insert, per-package item with a minimum order quantity of 10 units, making it suitable for shop floor restocking and production environments where consistent insert inventory is maintained.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction in H13A grade for consistent wear resistance in parting applications\u003c\/li\u003e\n\u003cli\u003e3.00 mm cutting width (0.1181 inch) for precise groove and cutoff dimensions\u003c\/li\u003e\n\u003cli\u003e5E chipbreaker geometry promotes controlled chip evacuation during parting cuts\u003c\/li\u003e\n\u003cli\u003eNeutral lead angle and neutral hand for straight, balanced parting operations\u003c\/li\u003e\n\u003cli\u003e7-degree relief angle reduces rubbing and supports clean cut entry\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish preserves tight edge geometry for precision grooving\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with SANDVIK COROMANT T-Max Q-Cut series toolholders accepting N151.2 style inserts with an insert seat size of 30 and a clamp holding method.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert installation and replacement should be performed by a qualified machinist with the machine fully powered down and spindle locked. Use the appropriate torx or hex key specified by the toolholder manufacturer when seating the clamp; do not overtighten, as this can fracture the carbide body. Ensure the insert pocket is clean and free of chips or debris before seating the insert. Verify cutting width and corner radius against your part drawing before resuming production.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: N151.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: H13A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.00 mm (0.1181 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 3.00 mm (0.1181 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: 5E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees, Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7.00 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-Max Q-Cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5737062\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51732668678450,"sku":"5737062","price":211.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e3440aaff8d1f662821b0006995f4648_bc497f3a-71a1-4838-85c6-3612758b0f64.jpg?v=1788745540","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5737062-cutoff-insert-3mm-t-max-q-cut","provider":"Voomi Supply","version":"1.0","type":"link"}