{"product_id":"sandvik-coromant-5736629-cutoff-insert-corocut-3-2mm","title":"Sandvik Coromant 5736629 Cutoff Insert Corocut 3 2mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5736629 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. It carries the N123U3 insert style designation and belongs to the CoroCut 3 series, engineered for stable, narrow-groove parting with a 2.00 mm (0.0787 inch) cutting width. The insert features a CM chipbreaker geometry and a TiAlN coating applied via PVD process, providing heat resistance and edge durability in a wide range of workpiece materials. A neutral lead angle and 7-degree relief angle support clean, consistent chip formation during cutoff cycles. Licensed machinists and CNC turning specialists install this insert in compatible CoroCut 3 toolholders.\u003c\/p\u003e\n\u003cp\u003eThis insert is suited for parting, grooving, and cutoff applications on bar stock, turned components, and workpieces requiring narrow slot widths. The 2.00 mm cutting width and 6.40 mm maximum depth of cut make it a practical choice for small- to medium-diameter workpieces in production and job-shop turning environments. The CM chipbreaker geometry is optimized to control chip flow in both light and moderate feed conditions. This insert is typically used in horizontal and vertical CNC turning centers by machining professionals and toolroom technicians.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with TiAlN PVD coating for extended tool life and thermal resistance\u003c\/li\u003e\n  \u003cli\u003e2.00 mm cutting width supports precision narrow-groove and parting operations\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut of 6.40 mm for small- to medium-diameter workpiece parting\u003c\/li\u003e\n  \u003cli\u003eCM chipbreaker geometry promotes controlled chip evacuation at moderate feeds\u003c\/li\u003e\n  \u003cli\u003eNeutral lead angle and 7-degree relief angle reduce lateral cutting forces\u003c\/li\u003e\n  \u003cli\u003e0.10 mm corner radius minimizes stress concentration at the cutting edge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement insert for CoroCut 3 series toolholders accepting N123U3 insert style with a U seat size. Catalog reference: N123U3-0200-0001-CM 1125.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified CNC machinists or toolroom technicians following the toolholder manufacturer's clamping procedure. Ensure the machine spindle is fully stopped and the toolholder is removed or secured before seating or replacing inserts. Use the correct insert clamp key to achieve proper seating in the pocket — do not overtighten or force the clamp. Inspect the insert pocket for debris or wear before installing a new insert to ensure accurate seating and edge position.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: N123U3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroCut 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1125\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: CM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 2.00 mm (0.0787 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 6.40 mm (0.252 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 11.10 mm (0.437 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.10 mm (0.0039 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: U\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5736629\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51728065036594,"sku":"5736629","price":496.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d14d2aff1ce731911b47e30f39c9a9d8.jpg?v=1788687315","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5736629-cutoff-insert-corocut-3-2mm","provider":"Voomi Supply","version":"1.0","type":"link"}