{"product_id":"sandvik-coromant-5736414-grooving-insert-solid-carbide","title":"Sandvik Coromant 5736414 Grooving Insert Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5736414 is a solid carbide grooving insert designed for precision external grooving and parting operations on CNC lathes and turning centers. It carries the N123H2GF 1105 designation, placing it in the CoroCut 1-2 series with a GF chip breaker geometry optimized for controlled chip formation. The insert features a TiAlN2 PVD coating for wear resistance in demanding cutting conditions. With a cutting width of 0.1559 inches (3.96 mm) and a maximum depth of cut of 0.9606 inches (24.4 mm), it handles a broad range of groove depths in a single holder. Machinists and CNC operators in production and job-shop environments install this insert for reliable, repeatable grooving performance.\u003c\/p\u003e\u003cp\u003eThis insert is suited for neutral-hand external grooving applications on turning centers where controlled chip evacuation and consistent groove width are required. The CoroCut 1-2 series is widely applied in both high-volume production and short-run turning scenarios. The GF chip breaker geometry is typically used when machining materials that require positive rake cutting action, making this insert a fit for a variety of workpiece materials where clean groove walls and predictable tool life are priorities. It is sold individually with a minimum order quantity of 10 units.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide substrate with TiAlN2 PVD coating for elevated wear resistance\u003c\/li\u003e\n\u003cli\u003eGF chip breaker geometry for controlled chip formation during grooving\u003c\/li\u003e\n\u003cli\u003e3.96 mm (0.1559 inches) cutting width for precise groove sizing\u003c\/li\u003e\n\u003cli\u003eMaximum depth of cut of 24.4 mm (0.9606 inches) covering a wide range of groove depths\u003c\/li\u003e\n\u003cli\u003eNeutral hand orientation for flexible toolholder compatibility\u003c\/li\u003e\n\u003cli\u003e7-degree rake angle with 0.20 mm corner radius for clean entry and exit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with SANDVIK COROMANT CoroCut 1-2 series toolholders accepting H2 insert seat size. ISO code N123H203960002GF1105 identifies the exact insert geometry for holder and catalog matching.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician with the machine powered down and the spindle locked before insert indexing or replacement. Use the correct torque wrench and clamping screw specified for the CoroCut 1-2 toolholder to secure the insert without over-torquing the clamping mechanism. Inspect the insert pocket and clamping surfaces for chips or debris before seating the insert. Always verify cutting parameters against the applicable grade and geometry recommendations before resuming operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: N123\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroCut 1-2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: GF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.1559 inches (3.96 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.9606 inches (24.40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0079 inches (0.20 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7.00 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: H2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1713 inches (4.35 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: N123H203960002GF1105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5.08 inches L x 2.13 inches W x 0.53 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.19 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5736414\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51753402073394,"sku":"5736414","price":853.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/bc8a1268dcb92452959f1dfa7238e272_14eae9c3-ae35-4222-af13-5c8f0872ee7d.jpg?v=1788936344","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5736414-grooving-insert-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}