{"product_id":"sandvik-coromant-5736398-grooving-insert-corocut-3","title":"Sandvik Coromant 5736398 Grooving Insert Corocut 3","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5736398 is a solid carbide grooving insert designed for precision external grooving operations on CNC turning centers and lathes. Manufactured to the ISO code N123T3-0080-0000-GS 1125, this insert features a TiAlN coating applied via PVD process, delivering high hardness and thermal resistance at the cutting edge. The 0.80 mm cutting width and 1.80 mm maximum depth of cut make it well suited for fine, shallow grooving applications where dimensional accuracy is critical. It carries a neutral hand orientation with a 7-degree rake angle and GS chip breaker geometry. Machinists and CNC operators in production and job-shop environments are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis insert belongs to the CoroCut 3 series and is intended for grooving operations on metallic workpieces in both production turning and precision component manufacturing. The GS chip breaker geometry promotes controlled chip formation in a range of materials. The T-size insert seat and overall length of 0.4094 inches allow direct fitment into compatible CoroCut 3 toolholders. Applications include grooving on shafts, hydraulic components, automotive parts, and precision turned parts where narrow groove widths are required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide substrate with PVD-applied TiAlN coating for extended tool life and heat resistance\u003c\/li\u003e\n  \u003cli\u003e0.80 mm cutting width with a maximum depth of cut of 1.80 mm for fine, controlled grooving\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation with 7-degree rake angle suits a broad range of turning setups\u003c\/li\u003e\n  \u003cli\u003eGS chip breaker geometry promotes efficient chip evacuation in shallow grooving cuts\u003c\/li\u003e\n  \u003cli\u003eCoroCut 3 series insert for use with compatible T-seat toolholders\u003c\/li\u003e\n  \u003cli\u003eMulti-use tool designation supports versatile application across compatible holding systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with CoroCut 3 series toolholders accepting a T-size insert seat. ISO designation N123T3-0080-0000-GS 1125 identifies the exact holder and seat compatibility. Verify toolholder seat size and clamping style before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified CNC machinist or toolroom technician. Power down the machine and engage all lockout-tagout procedures before handling inserts or toolholders. Seat the insert fully in the pocket and tighten the clamping screw to the toolholder manufacturer's specified torque using the correct Torx or hex key. Inspect the insert seat and clamping surfaces for chips or debris before seating a new insert to avoid premature edge failure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: N123\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroCut 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1125\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 7.00 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: GS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.80 mm (0.0315 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 1.80 mm (0.0709 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 3.73 mm (0.1470 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1469 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.4094 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size\u003c\/strong\u003e: T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: N123T3-0080-0000-GS 1125\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.16 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5736398\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51730764693810,"sku":"5736398","price":982.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/55f0d1de0b5a7366af47a055fa9e09ae.jpg?v=1788722479","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5736398-grooving-insert-corocut-3","provider":"Voomi Supply","version":"1.0","type":"link"}