{"product_id":"sandvik-coromant-5736211-cutoff-insert-4mm-carbide-corocut-1-2","title":"Sandvik Coromant 5736211 Cutoff Insert 4mm Carbide Corocut 1-2","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5736211 is a solid carbide cutoff and grooving insert designed for precision parting and grooving operations on CNC lathes and turning centers. It carries a 4.00 mm (0.1575 inch) cutting width, a neutral lead angle, and a TiAlN coating applied via PVD process for improved wear resistance and tool life in demanding materials. The insert measures 24.80 mm (0.9764 inch) in overall length and supports a maximum depth of cut of 23.70 mm (0.9331 inch). The CR chipbreaker geometry promotes controlled chip formation during cutoff operations. Licensed machinists and CNC operators install this insert as a direct production consumable.\u003c\/p\u003e\n\u003cp\u003eThis insert is used in metalworking environments where reliable cutoff and grooving performance is required on turning equipment. It is engineered for use in the CoroCut 1-2 toolholder system, a clamping-style insert platform common in both production and job-shop turning applications. The H insert seat size and N123x2 insert style define the compatible toolholder pocket geometry. Typical applications include parting off bar stock, shallow grooving, and profiling on ferrous and non-ferrous workpieces in both manual and automated turning cells.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide substrate with PVD-applied TiAlN coating for extended wear resistance\u003c\/li\u003e\n  \u003cli\u003e4.00 mm cutting width (0.1575 inch) with a 0.30 mm (0.0118 inch) corner radius\u003c\/li\u003e\n  \u003cli\u003eNeutral lead angle and neutral hand orientation for straight cutoff and grooving\u003c\/li\u003e\n  \u003cli\u003eCR chipbreaker geometry for controlled chip evacuation\u003c\/li\u003e\n  \u003cli\u003e7-degree relief angle to reduce cutting forces and tool pressure\u003c\/li\u003e\n  \u003cli\u003eClamp-style insert holding method compatible with CoroCut 1-2 toolholders\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut of 23.70 mm (0.9331 inch) for deep grooving applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with CoroCut 1-2 series clamping toolholders requiring an H insert seat size and N123x2 insert style. Verify toolholder pocket geometry against insert style N123H2-0400-0003-CR before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC technician with the machine fully stopped and in a locked-out, de-energized state before changing inserts. Use the appropriate torx or hex key torque tool as specified by the toolholder manufacturer for the clamp screw — do not overtighten by hand. Inspect the insert pocket seat for chips or debris before seating the new insert. Confirm insert is fully seated and clamp is secure before resuming cutting operations.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: N123x2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1125\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 4.00 mm (0.1575 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 23.70 mm (0.9331 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 24.80 mm (0.9764 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.30 mm (0.0118 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: CR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroCut 1-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.19 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5736211\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51749678186802,"sku":"5736211","price":681.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a0a67a6f1417f89acb3fd5670bb780e4_aae23e31-eff1-4990-a98a-b9d5815b01c4.jpg?v=1788909107","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5736211-cutoff-insert-4mm-carbide-corocut-1-2","provider":"Voomi Supply","version":"1.0","type":"link"}