{"product_id":"sandvik-coromant-5735434-carbide-cutoff-insert-2mm-corocut-xs","title":"Sandvik Coromant 5735434 Carbide Cutoff Insert 2mm Corocut Xs","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5735434 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. Carrying the MACR3200-T 1025 designation, it belongs to the CoroCut XS series and features a 2.00 mm cutting width with a 0-degree lead angle and right-hand orientation. The insert is manufactured from solid carbide with a PVD-applied TiAlN\/TiN coating for wear resistance in demanding cut-off applications. With a maximum depth of cut of 8.20 mm, it suits small-diameter parting work where precision and edge integrity are critical. This insert is installed by CNC machinists and turning specialists in production and job-shop environments.\u003c\/p\u003e\u003cp\u003eThe SANDVIK COROMANT 5735434 is suited for parting, grooving, and profiling operations on small-diameter workpieces. The CoroCut XS series is optimized for use in Swiss-type and small-part turning machines where tight clearances and controlled chip evacuation matter. The MAC chipbreaker geometry supports efficient chip control in continuous cuts. This insert is held in place via a clamp-style insert holding method, compatible with CoroCut XS toolholders designed for size 3 inserts.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction with PVD TiAlN\/TiN coating for extended tool life\u003c\/li\u003e\n\u003cli\u003e2.00 mm cutting width with 0-degree lead angle and right-hand orientation\u003c\/li\u003e\n\u003cli\u003eMAC chipbreaker geometry for controlled chip evacuation\u003c\/li\u003e\n\u003cli\u003eMaximum depth of cut of 8.20 mm suitable for small-diameter parting\u003c\/li\u003e\n\u003cli\u003eCorner radius of 0.05 mm for precise edge geometry\u003c\/li\u003e\n\u003cli\u003eClamp-style holding method for secure insert retention in CoroCut XS holders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with CoroCut XS series clamping toolholders accepting size 3 inserts. Refer to the SANDVIK COROMANT CoroCut XS toolholder selection guide for compatible holder designations.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis insert is installed and replaced by qualified CNC machinists or tooling technicians. Power down and lock out the machine spindle before performing any insert change. Ensure the insert seat and clamp pocket are clean and free of chips before seating the insert. Handle carbide inserts with care to avoid chipping the cutting edges prior to use.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroCut XS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: MACR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1025\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\/TiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 2.00 mm (0.0787 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 6.00 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.05 mm (0.0020 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 8.20 mm (0.3228 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12.02 mm (0.4732 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Width\u003c\/strong\u003e: 2.00 mm (0.0787 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: MAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 3.74 x 1.58 x 0.53 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5735434\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51749229330738,"sku":"5735434","price":457.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/382396f00f805e246991aeb7cfb22b6c_c7efbca3-5a04-44c3-a35c-37c01bd6df27.jpg?v=1788903388","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5735434-carbide-cutoff-insert-2mm-corocut-xs","provider":"Voomi Supply","version":"1.0","type":"link"}