{"product_id":"sandvik-coromant-5735408-cutoff-insert-1-5-mm-carbide","title":"Sandvik Coromant 5735408 Cutoff Insert 1.5 Mm Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5735408 is a solid carbide cutoff and grooving insert in the CoroCut XS series, designed for parting, grooving, and turning operations on CNC lathes and turning centers. It features a 1.5 mm cutting width, an H13A uncoated carbide grade, and a MAG chipbreaker geometry optimized for chip control in small-diameter and shallow-groove applications. The insert mounts via screw-holding method in a right-hand orientation and delivers a maximum depth of cut of 3.70 mm. Its 6-degree relief angle and 0.05 mm corner radius make it well suited for precision grooving where tight tolerances and clean finishes are required.\u003c\/p\u003e\n\u003cp\u003eThis insert is intended for use in metalworking and machining environments, specifically in turning centers equipped with CoroCut XS compatible toolholders. Typical applications include cutoff operations on small-diameter barstock, shallow external grooving, and profile turning in production or job-shop settings. It is installed and serviced by machinists and CNC setup technicians working with ferrous and non-ferrous materials. The uncoated H13A grade is particularly suited for applications where sharp cutting edges and precise geometry are prioritized over coated-grade wear resistance.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction with H13A uncoated grade for sharp, precise cutting edges\u003c\/li\u003e\n  \u003cli\u003e1.5 mm cutting width with a width tolerance of 0.0008 inches for tight groove accuracy\u003c\/li\u003e\n  \u003cli\u003eMAG chipbreaker geometry for controlled chip evacuation in grooving and parting\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut of 3.70 mm suitable for shallow to moderate groove depths\u003c\/li\u003e\n  \u003cli\u003eScrew-mount insert holding method for secure, repeatable seating in compatible toolholders\u003c\/li\u003e\n  \u003cli\u003eRight-hand orientation, insert style MAGR, seat size 3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with CoroCut XS series toolholders that accept MAGR style, seat size 3 inserts with screw-clamping. Verify toolholder seat size and clamping style before ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC technician with the machine powered off and spindle locked before insert replacement. Use the appropriate Torx or hex key specified by the toolholder manufacturer to secure the clamping screw — do not overtighten. Inspect the insert pocket and seating surface for debris or damage before seating the new insert. Confirm correct insert orientation and hand designation match the toolholder before resuming operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroCut XS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: MAGR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: H13A\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: MAG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 1.5 mm (0.0591 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth Tolerance\u003c\/strong\u003e: 0.0008 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 3.70 mm (0.1457 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.05 mm (0.0020 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 6 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Grooving, Parting, Turning\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 3.74 inches L x 1.58 inches W x 0.53 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.11 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5735408\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51729443193138,"sku":"5735408","price":372.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e89d8651fa8c1c76ee28a31143aaebff.jpg?v=1788704689","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5735408-cutoff-insert-1-5-mm-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}