{"product_id":"sandvik-coromant-5735236-cutoff-insert-5mm-left-hand","title":"Sandvik Coromant 5735236 Cutoff Insert 5mm Left Hand","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5735236 is a solid carbide cutoff insert designed for parting and grooving operations on CNC lathes and turning centers. Built to the L151.2 insert style, it features a 5 mm (0.1969 inches) cutting width with a 0-degree lead angle and a left-hand orientation. The insert carries a 1125 manufacturer grade with a TiAlN coating applied via a PVD process, which delivers strong oxidation resistance and edge wear performance in steel and stainless applications. A 4E chipbreaker geometry controls chip flow and reduces cutting forces during deep parting cuts. A licensed machinist or CNC turning specialist is the typical installer and operator.\u003c\/p\u003e\u003cp\u003eThis insert is suited for use in production turning environments where consistent groove width and clean cutoff are required. It fits into T-Max Q-Cut toolholders that accept the L151.2 insert style with an insert seat size of 50. The left-hand configuration is used when the tool approaches from the tailstock end or the toolholder orientation requires a left-hand cutting edge. Typical applications include bar-fed CNC lathes in job shops and high-volume production cells cutting steel, stainless steel, and similar materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and long tool life in interrupted and continuous cuts\u003c\/li\u003e\n\u003cli\u003e5 mm cutting width (0.1969 inches) for precise, consistent groove and parting dimensions\u003c\/li\u003e\n\u003cli\u003eTiAlN coating via PVD process for elevated temperature resistance and reduced flank wear\u003c\/li\u003e\n\u003cli\u003e1125 manufacturer grade optimized for steel and stainless steel turning applications\u003c\/li\u003e\n\u003cli\u003e4E chipbreaker geometry for reliable chip control during parting operations\u003c\/li\u003e\n\u003cli\u003e0.30 mm corner radius for controlled edge engagement and reduced part burr\u003c\/li\u003e\n\u003cli\u003eLeft-hand cutting orientation for specific toolholder and approach direction requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with T-Max Q-Cut toolholders that accept the L151.2 insert style with an insert seat size of 50 and a left-hand insert orientation.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed only when the machine spindle is fully stopped and the machine is locked out per shop safety procedures. Seat the insert firmly against the toolholder pocket and secure the clamp to manufacturer specifications using appropriate torque tools. Inspect the insert seat for chips or contamination before seating a new insert, as debris under the insert can cause premature edge failure or poor part geometry. Carbide inserts are brittle and should not be dropped or subjected to impact during handling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: L151.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-Max Q-Cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1125\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 5.00 mm (0.1969 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7.00 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.30 mm (0.0118 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: 4E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 5.08 inches L x 2.13 inches W x 0.53 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.16 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5735236\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51730625102130,"sku":"5735236","price":409.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7de06234ada79dd4763aad14ad7b3cf5.jpg?v=1788720463","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5735236-cutoff-insert-5mm-left-hand","provider":"Voomi Supply","version":"1.0","type":"link"}