{"product_id":"sandvik-coromant-5734773-indexable-turning-toolholder","title":"Sandvik Coromant 5734773 Indexable Turning Toolholder","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5734773 is a DWLNR-style indexable turning toolholder that uses a wedge clamping method to secure WNMG 432 inserts for external turning and facing operations. The holder features a 1 x 1 inch square shank and a 6 inch overall length, making it a standard-geometry choice for CNC lathes and manual turning centers. It is designed for right-hand cutting with a negative rake angle of -6 degrees. The steel construction provides the rigidity needed for consistent insert seating under interrupted cuts and continuous turning passes. Machinists and tool crib technicians working in production and job shop environments are the primary users of this toolholder.\u003c\/p\u003e\n\u003cp\u003eThis toolholder is suited for facing and external turning operations on CNC turning centers and conventional lathes where a 1 x 1 inch shank pocket is available. The DWLNR style positions the insert at a lead angle appropriate for facing and longitudinal turning. Its compatibility with WNMG 432 inserts gives the operator access to a wide range of Sandvik Coromant and ISO-standard insert grades for steel, stainless, and cast iron applications. The wedge clamping system provides positive insert location and quick index capability without requiring specialized tooling for insert changes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDWLNR toolholder style with right-hand cutting orientation\u003c\/li\u003e\n  \u003cli\u003eWedge clamping method for secure, repeatable insert seating\u003c\/li\u003e\n  \u003cli\u003eCompatible with WNMG 432 inserts with a 0.5 inch inscribed circle\u003c\/li\u003e\n  \u003cli\u003e1 x 1 inch square shank fits standard OD turning pockets\u003c\/li\u003e\n  \u003cli\u003eNegative rake geometry at -6 degrees for robust cutting edge support\u003c\/li\u003e\n  \u003cli\u003eSteel construction for rigidity and long service life in production turning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with WNMG 432 series indexable inserts. The 1 x 1 inch shank is compatible with standard OD toolholder pockets on CNC lathes and turning centers that accept that shank size.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician. Ensure the lathe or turning center is fully powered down and the spindle is locked before seating or removing the toolholder. The shank must be fully engaged in the tool block or quick-change post with adequate clamping contact to prevent deflection under cutting loads. Follow the machine tool manufacturer's torque guidelines for all clamping screws, and verify insert seating and tool height before initiating a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: DWLNR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: WNMG 432\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Wedge\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: -6 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.35 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBack of Bar to Cutting Edge\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Facing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.77 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23153308\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5734773\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51738170491186,"sku":"5734773","price":221.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/91c2d51c0452c135ec8dfd0471a940be.jpg?v=1788796568","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5734773-indexable-turning-toolholder","provider":"Voomi Supply","version":"1.0","type":"link"}