{"product_id":"sandvik-coromant-5734317-cutoff-insert-3mm-left-hand","title":"Sandvik Coromant 5734317 Cutoff Insert 3mm Left Hand","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5734317 is a solid carbide cutoff and grooving insert designed for parting operations on CNC lathes and turning centers. Built to the L151.2 insert style with a 3.00 mm (0.1181 inch) cutting width, this insert features a TiAlN coating applied via PVD process, which provides high heat resistance and extended tool life at elevated cutting speeds. The 1125 manufacturer grade is well suited for consistent performance across a range of workpiece materials. A 7-degree relief angle and a 0.20 mm corner radius contribute to clean, controlled chip formation during cutoff work. Installation is by clamp-style holding, compatible with the T-Max Q-Cut tooling system.\u003c\/p\u003e\u003cp\u003eThis insert is intended for use in the Sandvik Coromant T-Max Q-Cut series, a common platform in production turning environments for cutoff and shallow grooving applications. The left-hand lead angle configuration suits specific tool block orientations where the insert approaches the workpiece from the left-hand side. With an overall length of 5.58 mm (0.2197 inch), the insert fits compact blade and holder assemblies typical in high-volume CNC turning cells. Machinists and tool room technicians working in precision manufacturing and production shops will find this insert appropriate for consistent parting operations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction with PVD-applied TiAlN coating for high-temperature wear resistance\u003c\/li\u003e\n\u003cli\u003e3.00 mm cutting width (0.1181 inch) for standard cutoff and grooving operations\u003c\/li\u003e\n\u003cli\u003eLeft-hand lead angle and left-hand insert orientation for correct blade-side fitment\u003c\/li\u003e\n\u003cli\u003e5E chipbreaker geometry for controlled chip evacuation during parting\u003c\/li\u003e\n\u003cli\u003e0.20 mm corner radius for reduced edge stress at the cut zone\u003c\/li\u003e\n\u003cli\u003eClamp-style holding method for secure, repeatable insert indexing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with the Sandvik Coromant T-Max Q-Cut system using insert seat size 30 and insert style L151.2. Specific compatible blade and holder models should be confirmed against Sandvik Coromant tooling catalogs for the T-Max Q-Cut series.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert installation and indexing should be performed by a qualified machinist or tool room technician with the machine fully powered down and the spindle locked. Use the appropriate torque wrench and Sandvik Coromant-specified clamp hardware to secure the insert without over-tightening the clamping screw. Verify insert seating and orientation before resuming operation. Follow the machine manufacturer and tooling system guidelines for proper insert alignment and safe startup procedures.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: L151.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-Max Q-Cut\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1125\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 3.00 mm (0.1181 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.58 mm (0.2197 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead Angle Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: 5E\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5734317\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51752270037298,"sku":"5734317","price":346.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3b3e9d7cd582ff1295ff79a800d489a4_729c800f-4642-4e9d-8e6a-7e918588dc0d.jpg?v=1788927061","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5734317-cutoff-insert-3mm-left-hand","provider":"Voomi Supply","version":"1.0","type":"link"}