{"product_id":"sandvik-coromant-5734282-turning-insert-dnmg-3-8-ic","title":"Sandvik Coromant 5734282 Turning Insert Dnmg 3\/8 Ic","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5734282 is a DNMG-style indexable turning insert designed for precision metal cutting on CNC lathes and turning centers. Manufactured from solid carbide and coated with a TiCN, Al2O3, and TiN multilayer system, this insert is engineered for cutting stainless steel and other difficult-to-machine materials in the T-Max P series. The 55-degree diamond insert shape provides a sharp, focused cutting geometry, while the MF chip breaker geometry controls chips effectively at moderate feeds and depths. With four available cutting edges, the insert delivers extended tool life and cost efficiency per edge. Machinists and CNC operators in production and job-shop environments install this insert as a direct OEM replacement or new tooling selection.\u003c\/p\u003e\n\u003cp\u003eThis insert is intended for external turning operations on stainless steel workpieces, corresponding to ISO material group M. It fits standard DNMG toolholders with a clamp-and-pin holding method. The T-Max P series is suited for general turning in both roughing and finishing passes where chip control and surface integrity are priorities. The MF chip breaker geometry is optimized for light-to-medium feeds, making it well suited for finishing and semi-finishing passes on austenitic and duplex stainless grades. Installation into compatible DNMG toolholders is straightforward and consistent with standard indexable insert change procedures.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eTiCN, Al2O3, and TiN multilayer CVD coating for wear resistance and heat management on stainless steel\u003c\/li\u003e\n  \u003cli\u003eMF chip breaker geometry optimized for light-to-medium feed finishing and semi-finishing operations\u003c\/li\u003e\n  \u003cli\u003e55-degree diamond insert shape (DNMG style) delivers a sharp cutting edge and versatile toolpath options\u003c\/li\u003e\n  \u003cli\u003eFour cutting edges per insert for maximum utilization and lower cost per edge\u003c\/li\u003e\n  \u003cli\u003eNeutral hand orientation compatible with standard DNMG toolholder setups\u003c\/li\u003e\n  \u003cli\u003eClamp and pin holding method ensures secure seating and repeatable positioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in DNMG-style toolholders that accept a 3\/8-inch inscribed circle insert with a clamp-and-pin holding method. ISO code DNMG 11 04 08-MF 2015. Consult toolholder documentation to confirm seat geometry and clamping compatibility before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eIndexable turning inserts are installed by qualified machinists or CNC tooling technicians. Always power down and lock out the machine spindle before changing inserts. Use the correct torque wrench and clamping hardware specified by the toolholder manufacturer — do not overtighten the clamp screw, as this can crack the carbide insert or damage the seat. Inspect the toolholder pocket and locating pin for wear or debris before seating a new insert.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: DNMG\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: DNMG 11 04 08-MF 2015\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 2015\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN, Al2O3, TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: MF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: 55-Degree Diamond\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 3\/8 inches (0.3752 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 1\/32 inches (0.0315 inches \/ 0.80 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 11.63 mm (0.4579 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 3\/16 inches (0.1875 inches \/ 4.76 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.150 inches (3.81 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.4264 inches (10.83 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel (ISO Code M)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-Max P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.17 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5734282\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51739088585010,"sku":"5734282","price":332.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c66652ec499836f0fbf73603904f452d_ecd4b5bd-c1df-4f93-bee4-b9cdd15aab47.jpg?v=1788809213","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5734282-turning-insert-dnmg-3-8-ic","provider":"Voomi Supply","version":"1.0","type":"link"}