{"product_id":"sandvik-coromant-5732381-indexable-boring-bar-solid-carbide","title":"Sandvik Coromant 5732381 Indexable Boring Bar Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5732381 is a solid carbide indexable boring bar designed for internal turning operations on CNC lathes and turning centers. Part of the CoroTurn 111 series, it accepts CPMT 06 02 04 inserts secured by a screw clamp and features a positive rake geometry with a 6-degree rake angle and a -5-degree lead angle. The right-hand holder has a 1\/2-inch shank diameter and an 8-inch overall length, with a minimum bore diameter of 0.5984 inches. Coolant-through capability helps control heat and chip evacuation during deep-bore or tight-tolerance work. Licensed machinists and CNC operators install this bar in standard round-shank tool holders.\u003c\/p\u003e\n\u003cp\u003eThe 5732381 is suited for precision internal turning in both roughing and finishing passes where consistent insert indexing and rigidity are critical. The solid carbide construction provides higher stiffness and vibration resistance compared to steel-shank alternatives, making it well-matched for small-diameter bores and long-reach applications. It supports multi-use turning operations and is appropriate for production environments machining steel, stainless, cast iron, and similar materials. Typical applications include bore sizing, facing, and contour turning on parts where dimensional accuracy and surface finish are closely controlled.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide shank for maximum rigidity and vibration damping in small-bore applications\u003c\/li\u003e\n  \u003cli\u003eCoroTurn 111 series with screw-clamped CPMT 06 02 04 insert compatibility\u003c\/li\u003e\n  \u003cli\u003eCoolant-through design for improved chip evacuation and tool life in deep bores\u003c\/li\u003e\n  \u003cli\u003ePositive rake geometry with 6-degree rake angle reduces cutting forces\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with -5-degree lead angle for controlled entry and exit geometry\u003c\/li\u003e\n  \u003cli\u003eMulti-use tool rated for internal turning operations across a range of materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with CPMT 06 02 04 series inserts in the SANDVIK COROMANT CoroTurn 111 tooling system. Fits standard 1\/2-inch round-shank boring bar pockets on CNC turning centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician with the machine in a locked-out, de-energized state per applicable safety procedures. Secure the shank fully within the tool holder to the recommended clamp-depth marked on the bar. Verify insert seating and screw torque per the insert manufacturer specification before taking any cut. Confirm coolant-through passages are clear and connected before resuming production.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroTurn 111\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Bore Diameter\u003c\/strong\u003e: 0.5984 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter to Cutting Edge\u003c\/strong\u003e: 0.312 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: -5 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: 6 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Positive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: CPMT 06 02 04\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 7.95 inches L x 1.18 inches W x 1.18 inches H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.71 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5732381\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51732470759730,"sku":"5732381","price":722.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e5fa7b6dc7d605db0fda448b2ad14d48_7afabc9d-395c-4da5-ad62-2a033772f74d.jpg?v=1788743190","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5732381-indexable-boring-bar-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}