{"product_id":"sandvik-coromant-5732336-turning-toolholder-dwlnl163d-left-hand","title":"Sandvik Coromant 5732336 Turning Toolholder DWLNL163D Left Hand","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5732336 is a left-hand indexable turning toolholder in the DWLNL style, designed for use with WNMG 332 inserts secured by a wedge clamping method. The shank measures 1 inch wide by 1 inch tall, with an overall length of 6 inches. The holder carries a negative rake angle of -6 degrees, which is standard for WNMG-style negative inserts used in facing and general turning operations. It is intended for use by machinists and CNC lathe operators working on metal turning applications where consistent insert seating and repeatable edge presentation are required.\u003c\/p\u003e\u003cp\u003eThis toolholder is suited for facing operations on CNC turning centers and manual lathes. The 1-by-1-inch shank size fits commonly available tool blocks and quick-change turrets in that bore range. The left-hand orientation positions the cutting edge for specific approach directions on the machine, making it appropriate for applications where a right-hand holder would interfere with the part or chuck. The wedge clamping method provides rigid insert retention, which helps maintain stability during interrupted cuts or aggressive feed rates.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLeft-hand DWLNL holder style for directional facing and turning\u003c\/li\u003e\n\u003cli\u003eWedge insert clamping for rigid, repeatable insert seating\u003c\/li\u003e\n\u003cli\u003eCompatible with WNMG 332 negative-rake inserts\u003c\/li\u003e\n\u003cli\u003e1 inch by 1 inch shank cross-section fits standard tool blocks\u003c\/li\u003e\n\u003cli\u003e6-inch overall length suits common CNC lathe turret setups\u003c\/li\u003e\n\u003cli\u003eSteel construction for durability under continuous cutting loads\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with WNMG 332 inserts. The holder style is DWLNL163D. Confirm turret or tool block bore size matches the 1-by-1-inch shank dimensions before ordering.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist familiar with CNC lathe tooling setup. Power down and lock out the machine before mounting or removing toolholders from the turret. Ensure the insert pocket and clamping wedge are clean and free of chips before seating a new insert. Torque the wedge clamp screw according to the insert manufacturer's guidelines for the specific insert grade and application.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: DWLNL163D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Compatibility\u003c\/strong\u003e: WNMG 332\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Wedge\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 1.95 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Inscribed Circle\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake\u003c\/strong\u003e: Negative\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRake Angle\u003c\/strong\u003e: -6 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Tool Application\u003c\/strong\u003e: Facing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolholder Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.73 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5732336\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51737592168754,"sku":"5732336","price":221.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/381e3c8f57598406bcab9523a82da93a.jpg?v=1788791024","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5732336-turning-toolholder-dwlnl163d-left-hand","provider":"Voomi Supply","version":"1.0","type":"link"}