{"product_id":"sandvik-coromant-5730412-turning-insert-dcgt-coroturn-107","title":"Sandvik Coromant 5730412 Turning Insert Dcgt Coroturn 107","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5730412 is a solid carbide turning insert designed for precision external turning operations on CNC lathes and turning centers. Conforming to the DCGT insert style with a 55-degree diamond shape, this insert features an uncoated (bright) H13A carbide grade and a UM chip breaker geometry. It is engineered for light finishing cuts where sharp edges and tight tolerances are required. The inscribed circle measures 3\/8 inch (0.3750 inch), insert length is 0.4499 inches, and the corner radius is 0.20 mm (0.0079 inch). Two cutting edges are available per insert. The ISO code for this insert is DCGT 11 T3 02-UM H13A.\u003c\/p\u003e\u003cp\u003eThis insert is suited for finishing passes on steel and stainless steel workpieces in both production and job-shop environments. The UM chip breaker geometry is optimized for low cutting forces and controlled chip formation at light depths of cut and high surface-finish requirements. It is primarily rated for P-grade (steel) work material and secondarily for M-grade (stainless steel) applications. Installation is performed by machinists and CNC operators maintaining turning toolholders in the CoroTurn 107 series. The screw-clamp holding method provides positive seating and repeatable edge positioning at each insert change.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUncoated H13A solid carbide grade for sharp, free-cutting performance on steel and stainless steel\u003c\/li\u003e\n\u003cli\u003eUM chip breaker geometry designed for light finishing cuts with controlled chip formation\u003c\/li\u003e\n\u003cli\u003e55-degree diamond insert shape (DCGT style) with 7-degree relief angle for clearance in turning applications\u003c\/li\u003e\n\u003cli\u003e0.20 mm corner radius suitable for fine surface finishes and tight radii on finished parts\u003c\/li\u003e\n\u003cli\u003eTwo usable cutting edges per insert for extended tool life between insert replacements\u003c\/li\u003e\n\u003cli\u003eScrew-clamp holding method for secure, repeatable seating in compatible CoroTurn 107 toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eThis insert is part of the SANDVIK COROMANT CoroTurn 107 series and is designed for use in CoroTurn 107 toolholders that accept DCGT-style inserts with the corresponding pocket geometry and screw-clamp holding method.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInsert changes should be performed by a qualified machinist or CNC operator with the machine powered down and spindle fully stopped. Use the appropriate Torx or hex key to remove and seat the clamping screw to the toolholder manufacturer's specified procedure. Inspect the insert pocket for chips or debris before seating the new insert. Handle uncoated carbide inserts with care to avoid edge chipping during installation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: DCGT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: DCGT 11 T3 02-UM H13A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: 55-degree Diamond\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: H13A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: UM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 3\/8 inch (0.3750 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.4499 inches (11.43 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 5\/32 inch (0.1563 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1732 inch (4.40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClearance Code\u003c\/strong\u003e: C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Stainless Steel (M)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroTurn 107\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5730412\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51734550315314,"sku":"5730412","price":423.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/be65dabc3bae5e6e1257cf10e5004a15.jpg?v=1788763450","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5730412-turning-insert-dcgt-coroturn-107","provider":"Voomi Supply","version":"1.0","type":"link"}