{"product_id":"sandvik-coromant-5730400-turning-insert-dcgt32-50-um-5015","title":"Sandvik Coromant 5730400 Turning Insert DCGT32.50-UM 5015","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5730400 is a cermet, uncoated turning insert in the CoroTurn 107 series, designed for precision external turning operations on CNC and conventional lathes. The insert carries the ISO designation DCGT 11 T3 02-UM 5015 and features a 55-degree diamond shape with a neutral hand orientation. It measures 0.4499 inches in length, with a 0.375-inch (3\/8 inch) inscribed circle and a 0.20 mm (0.0079 inch) corner radius. The UM chip breaker geometry and grade 5015 cermet substrate make this insert well suited for finishing and semi-finishing passes at higher cutting speeds. Screw clamping secures the insert in compatible toolholders. Licensed machinists and CNC operators are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis insert is applied primarily to steel and cast iron workpieces, corresponding to ISO material groups P and K. It is intended for turning operations within the CoroTurn 107 system, which uses screw-on clamping. Typical use cases include finish turning of carbon steel shafts, cast iron housings, and similar components where tight tolerances and good surface finish are required. The full-radius geometry and UM chip breaker support consistent chip control at moderate-to-high feeds on small-to-medium diameter features. The insert supports a maximum depth of cut of 0.4499 inches (11.43 mm).\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 5015 cermet substrate — bright, uncoated finish optimized for steel and cast iron finishing\u003c\/li\u003e\n  \u003cli\u003e55-degree diamond insert shape (DCGT) with 7-degree relief angle for positive cutting geometry\u003c\/li\u003e\n  \u003cli\u003eUM chip breaker for controlled chip evacuation during finish and semi-finish turning\u003c\/li\u003e\n  \u003cli\u003e0.20 mm corner radius balances edge strength and surface finish requirements\u003c\/li\u003e\n  \u003cli\u003eTwo cutting edges per insert; neutral hand suits standard right-hand and left-hand toolholders\u003c\/li\u003e\n  \u003cli\u003eScrew-on insert holding method compatible with CoroTurn 107 toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with SANDVIK COROMANT CoroTurn 107 series screw-clamp toolholders that accept DCGT-style inserts with a 3\/8-inch inscribed circle. Primary workpiece materials are steel (ISO P) and cast iron (ISO K).\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInsert seating and clamping should be performed by a qualified machinist following the toolholder manufacturer's torque and clamping guidelines. Power down and lock out the machine spindle before changing inserts. Inspect the insert pocket and seating surface for debris or damage before seating a new insert. Do not exceed the maximum depth of cut specification for the insert geometry.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: DCGT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: DCGT 11 T3 02-UM 5015\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: 55-Degree Diamond\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 5015\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Cermet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright \/ Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: UM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.20 mm (0.0079 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.4499 inches (11.43 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 5\/32 inch (0.1563 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.4499 inches (11.43 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 55 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.1563 inches (4.40 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (ISO P)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Cast Iron (ISO K)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroTurn 107\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5730400\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51738615775538,"sku":"5730400","price":469.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5e45637cdfde4160b04d623ccd401436_c1972ca5-4bc0-4d49-9f9f-2c007a7f2f06.jpg?v=1788801816","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5730400-turning-insert-dcgt32-50-um-5015","provider":"Voomi Supply","version":"1.0","type":"link"}