{"product_id":"sandvik-coromant-5727885-modular-turning-profiling-head-c4","title":"Sandvik Coromant 5727885 Modular Turning Profiling Head C4","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5727885 is a modular turning profiling head designed for internal boring and profiling operations on CNC lathes and turning centers. Part of the CoroTurn 107 series, this right-hand head features a Size C4 system with a C5 head connection, a head length projection of 2.7559 inches (70 mm), and a center-to-cutting-edge distance of 0.4331 inches (11 mm). It accepts CCMT 09T308 inserts held by a clamp and screw method, and includes through-coolant capability to extend tool life and improve chip evacuation in deep-bore applications. Installed by machinists and CNC toolroom technicians.\u003c\/p\u003e\u003cp\u003eThis profiling head is suited for internal turning and profiling in bore diameters starting at a minimum of 0.7874 inches (20 mm) with a maximum hole depth of 2.7559 inches (70 mm). It is used in precision turning applications in metalworking environments including aerospace, automotive, and general machining where consistent bore geometry and surface finish are required. The modular CoroTurn 107 interface allows the head to be exchanged on compatible shanks without disturbing setup, reducing changeover time on multi-part runs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCoroTurn 107 modular system with C4 size and C5 head connection for repeatable positioning\u003c\/li\u003e\n\u003cli\u003eThrough-coolant design supports extended tool life and chip control in deep internal features\u003c\/li\u003e\n\u003cli\u003eAccepts CCMT 09T308 inserts via clamp and screw holding for rigid, predictable cutting\u003c\/li\u003e\n\u003cli\u003eMinimum bore diameter of 0.7874 inches (20 mm) suits a wide range of internal profiling applications\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction; radial rake angle of -8.3967 degrees optimized for CCMT insert geometry\u003c\/li\u003e\n\u003cli\u003eHead length projection of 2.7559 inches (70 mm) enables reach into deeper bore features\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eCompatible with CCMT 09T308 inserts. Designed for use with CoroTurn 107 series modular boring and turning systems using a C5 head connection interface.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician following the machine tool and tooling system manufacturer guidelines. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before mounting or exchanging modular heads. Torque the head connection to the tooling system specification using calibrated tooling wrenches. Verify through-coolant passages are clear and coolant supply is correctly pressurized before initiating a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: CoroTurn 107\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Size\u003c\/strong\u003e: C4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Connection Size\u003c\/strong\u003e: C5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal or External\u003c\/strong\u003e: Internal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Insert Style\u003c\/strong\u003e: CCMT 09T308\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead Length Projection\u003c\/strong\u003e: 2.7559 inches (70 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter to Cutting Edge\u003c\/strong\u003e: 0.4331 inches (11 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 0.7874 inches (20 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Hole Depth\u003c\/strong\u003e: 2.7559 inches (70 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 1.5748 inches (40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxial Rake Angle\u003c\/strong\u003e: 0 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadial Rake Angle\u003c\/strong\u003e: -8.3967 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.71 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242100\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5727885\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51727108473138,"sku":"5727885","price":655.74,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/85883c563267042223066fbb4872954e.jpg?v=1788673467","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5727885-modular-turning-profiling-head-c4","provider":"Voomi Supply","version":"1.0","type":"link"}