{"product_id":"sandvik-coromant-5726508-grooving-tool-right-hand-solid-carbide","title":"Sandvik Coromant 5726508 Grooving Tool Right Hand Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe SANDVIK COROMANT 5726508 is a solid carbide internal grooving tool designed for precision groove cutting in small-bore applications. Built from 1025 solid carbide with a TiAlN\/TiN finish, this tool delivers thermal resistance and wear performance in demanding turning operations. It cuts a 0.059-inch (1.50 mm) wide groove with a corner radius of 0.0079 inches (0.20 mm), and is configured for right-hand cutting direction. The 8.00 mm shank diameter and 62.00 mm overall length make it suited to CNC turning centers and Swiss-type lathes where tool clearance is tight and dimensional accuracy is critical. Installation and tool changes are performed by qualified machinists and tooling technicians.\u003c\/p\u003e\n\u003cp\u003eThis grooving tool is intended for internal grooving operations in bores with a minimum hole diameter of 7.70 mm. It reaches a maximum hole depth of 1.457 inches (37.00 mm), making it practical for shallow to mid-depth internal grooves in precision machined components. Typical applications include snap-ring groove cutting, O-ring groove preparation, and internal profile work on ferrous and non-ferrous materials where a TiAlN\/TiN coated solid carbide tool provides the required edge retention and surface finish.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in tight-bore grooving\u003c\/li\u003e\n  \u003cli\u003eTiAlN\/TiN finish provides thermal protection and extended tool life\u003c\/li\u003e\n  \u003cli\u003e0.059-inch (1.50 mm) groove width for consistent, repeatable groove sizing\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting configuration for standard CNC turning setups\u003c\/li\u003e\n  \u003cli\u003e8.00 mm shank diameter fits common small-bore toolholders\u003c\/li\u003e\n  \u003cli\u003e62.00 mm overall length balances reach with overhang stability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in CNC turning centers and Swiss-type lathes accepting an 8.00 mm shank diameter toolholder for internal grooving operations with a minimum bore entry of 7.70 mm.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and locked out before changing or setting tools. Secure the shank in the toolholder to the manufacturer-specified clamping torque for the holder used, and verify tool runout before cutting. Confirm bore clearance meets the 7.70 mm minimum hole diameter requirement before engaging the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGroove Width\u003c\/strong\u003e: 0.059 inches (1.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0079 inches (0.20 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Depth\u003c\/strong\u003e: 1.457 inches (37.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 7.70 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 8.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 62.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: TiAlN\/TiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5726508\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51739987902770,"sku":"5726508","price":128.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5d8d5de3bf9ea2531bdd4f970fe6bd8a_1f75de55-042d-4da5-81b1-c16c2ca56f07.jpg?v=1788821159","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5726508-grooving-tool-right-hand-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}