{"product_id":"sandvik-coromant-5724066-cnmg431-wf-turning-insert","title":"Sandvik Coromant 5724066 CNMG431-WF Turning Insert","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe SANDVIK COROMANT 5724066 is a CNMG-style indexable turning insert in the T-Max P series, designed for external turning operations on CNC lathes and machining centers. It features a multilayer MTCVD coating of TiCN, Al2O3, and TiN applied over a solid carbide substrate in manufacturer grade 1515, delivering wear resistance and thermal stability in continuous and interrupted cuts. The insert has an 80-degree diamond shape, a neutral hand orientation, a 0.5000-inch inscribed circle, and a corner radius of 0.0157 inch (1\/64 inch). Four usable cutting edges and a WF chip breaker geometry make it well suited for finishing and light roughing passes. Licensed machinists and CNC operators install this insert as a standard indexable tooling component.\u003c\/p\u003e\u003cp\u003eThis insert is intended for machining steel as its primary workpiece material (ISO code P) and stainless steel as a secondary application (ISO code M). The WF chip breaker geometry promotes chip control in finishing and semi-finishing operations at moderate feed rates. The T-Max P series is a platform commonly used in high-production turning cells where consistent surface finish and dimensional accuracy are required. The insert seats via clamp and pin holding methods in compatible CNMG toolholders.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMTCVD multilayer coating: TiCN, Al2O3, and TiN for extended tool life in steel and stainless steel\u003c\/li\u003e\n\u003cli\u003e80-degree diamond insert shape (Shape Code C) with neutral hand orientation\u003c\/li\u003e\n\u003cli\u003eWF chip breaker geometry optimized for finishing and semi-finishing passes\u003c\/li\u003e\n\u003cli\u003eFour indexable cutting edges for cost-effective tool management\u003c\/li\u003e\n\u003cli\u003e0.5000-inch inscribed circle with a 0.0157-inch corner radius for tight-tolerance work\u003c\/li\u003e\n\u003cli\u003eMaximum depth of cut of 0.4921 inch (12.50 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in CNMG-style toolholders that accept clamp and pin holding methods; ISO code CNMG120404WF1515 identifies the insert geometry for cross-referencing to compatible toolholder bores with a 0.2032-inch hole diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eIndex or replace turning inserts only after the machine spindle has come to a full stop and the lathe or machining center has been locked out per applicable machine-guarding procedures. Use the correct torque driver or clamp screw specified by the toolholder manufacturer to secure the insert; over-tightening the clamp screw can chip the cutting edge or damage the seat. Inspect the insert pocket and shim for wear or debris before seating a new insert. Insert indexing is typically performed by a CNC machinist or toolroom technician following the toolholder manufacturer's seating instructions.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: CNMG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: T-Max P\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: 1515\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN, Al2O3, TiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: MTCVD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Shape\u003c\/strong\u003e: 80-degree Diamond (Code C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip Breaker\u003c\/strong\u003e: WF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiper Edge\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Cutting Edges\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 0.5000 inch (12.70 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.0157 inch (0.40 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Length\u003c\/strong\u003e: 0.5079 inch (12.90 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Thickness\u003c\/strong\u003e: 0.1875 inch (4.76 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.2032 inch (5.16 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.4921 inch (12.50 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 0 degrees (Clearance Code N)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTolerance Code\u003c\/strong\u003e: M\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp and Pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (Code P)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Stainless Steel (Code M)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: CNMG120404WF1515\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: SANDVIK COROMANT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5724066\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SANDVIK COROMANT","offers":[{"title":"Default Title","offer_id":51739174076722,"sku":"5724066","price":342.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e082784b10b5ce64084749864a259dc0_948c9c5f-d8aa-49c6-96d2-d57a7ae7589e.jpg?v=1788810797","url":"https:\/\/voomisupply.com\/products\/sandvik-coromant-5724066-cnmg431-wf-turning-insert","provider":"Voomi Supply","version":"1.0","type":"link"}