{"product_id":"rust-oleum-9122402-dtm-epoxy-mastic-1-gal-marlin-blue","title":"Rust-oleum 9122402 Dtm Epoxy Mastic 1 Gal Marlin Blue","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe RUST-OLEUM 9122402 is a two-component, direct-to-metal (DTM) epoxy mastic coating formulated for high-performance corrosion protection on metal and concrete substrates. This 1-gallon base unit in Marlin Blue gloss is part of the 9100 System, a self-priming formula that bonds directly to prepared metal without a separate primer coat. The 1:1 mix ratio by volume eliminates measuring — each base kit pairs with a separately purchased activator. The cured film delivers superior resistance to solvents, chemicals, abrasion, and impact. Formulated with less than 340 VOCs and meeting USDA requirements for incidental food contact, this coating is accepted for use in federally registered Canadian food facilities. Licensed applicators and industrial maintenance painters are the primary installers.\u003c\/p\u003e\u003cp\u003eThe 9100 System is suited for industrial and commercial maintenance painting applications including structural steel, process equipment, secondary containment, and concrete floors. Four activator options extend the usable range of this coating: Standard Activator for air and surface temps of 50 to 100 degrees F, Low-Temperature Activator for 40 to 60 degrees F conditions, Fast-Cure Activator for recoat in 4 hours at 70 degrees F and 50 percent relative humidity, and Immersion Activator for fresh or salt water immersion of steel or concrete where water temperatures do not exceed 125 degrees F. The Immersion Activator is not suitable for potable water tanks.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDirect-to-metal self-priming formula bonds without a separate primer coat\u003c\/li\u003e\n\u003cli\u003e1:1 mix ratio by volume — no measuring equipment required\u003c\/li\u003e\n\u003cli\u003eFour activator options: Standard, Low-Temperature, Fast-Cure, and Immersion\u003c\/li\u003e\n\u003cli\u003eSuperior long-term resistance to solvents, chemicals, abrasion, and impact\u003c\/li\u003e\n\u003cli\u003eMeets USDA requirements for incidental food contact; accepted in federally registered Canadian food facilities\u003c\/li\u003e\n\u003cli\u003eLess than 340 VOCs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for application over a variety of substrates including bare metal, previously coated steel, and concrete surfaces prepared to the appropriate cleanliness standard. Activators are sold separately and must be matched to application conditions. The Immersion Activator is not approved for use in potable water tanks.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eApplication should be performed by qualified industrial painters or maintenance coating professionals familiar with two-component epoxy systems. Mix base and activator thoroughly at the specified 1:1 ratio and allow proper induction time before application. Ensure air and surface temperatures fall within the range specified for the chosen activator before and during application. Personal protective equipment including respirators and chemical-resistant gloves is required when handling epoxy coatings and activators.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Line\u003c\/strong\u003e: 9100 System DTM Epoxy Mastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Marlin Blue\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 1 gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix Ratio\u003c\/strong\u003e: 1:1 (base to activator by volume)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC Content\u003c\/strong\u003e: Less than 340 VOCs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast-Cure Recoat Time\u003c\/strong\u003e: 4 hours at 70 degrees F and 50 percent RH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Activator Temp Range\u003c\/strong\u003e: 50 to 100 degrees F air and surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Temperature Activator Range\u003c\/strong\u003e: 40 to 60 degrees F air and surface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImmersion Activator Max Water Temp\u003c\/strong\u003e: 125 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 13.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 020066912291\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RUST-OLEUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9122402\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RUST-OLEUM","offers":[{"title":"Default Title","offer_id":51344176021810,"sku":"9122402","price":167.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310539120.jpg?v=1782030768","url":"https:\/\/voomisupply.com\/products\/rust-oleum-9122402-dtm-epoxy-mastic-1-gal-marlin-blue","provider":"Voomi Supply","version":"1.0","type":"link"}