{"product_id":"rust-oleum-245309-alkyd-enamel-paint-gloss-gray-1280-fl-oz","title":"Rust-oleum 245309 Alkyd Enamel Paint Gloss Gray 1280 Fl Oz","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe RUST-OLEUM 245309 is an alkyd enamel paint formulated for direct-to-metal application in both indoor and outdoor environments. It delivers a gloss finish in a gray color family and ships in a 1,280 fl oz (10-gallon) can. Coverage ranges from 230 to 425 square feet per gallon depending on surface porosity and application method. The VOC content is 340 g\/L. Tack-free dry time is 4 hours, full cure is reached at 8 hours, and recoat can occur at 24 hours. Painters, maintenance technicians, and industrial coating contractors typically apply this product where a hard, durable enamel finish is required on metal substrates.\u003c\/p\u003e\u003cp\u003eThis paint is suited for residential and commercial maintenance applications where a tough, corrosion-resistant finish is needed on metal surfaces. It performs across a wide temperature range, with a minimum application temperature of 32 degrees F and a maximum of 100 degrees F. The direct-to-metal formulation eliminates the need for a separate primer on properly prepared bare metal, making it practical for structural steel, equipment housings, railings, and similar surfaces exposed to both interior and exterior conditions.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDirect-to-metal formulation — no separate primer required on clean, prepared metal\u003c\/li\u003e\n\u003cli\u003eGloss finish in gray color family for durable, visible surface protection\u003c\/li\u003e\n\u003cli\u003eCoverage of 230 to 425 square feet per gallon depending on substrate and application\u003c\/li\u003e\n\u003cli\u003eTack-free in 4 hours, fully dry in 8 hours, recoatable at 24 hours\u003c\/li\u003e\n\u003cli\u003eRated for indoor and outdoor use across temperatures from 32 to 100 degrees F\u003c\/li\u003e\n\u003cli\u003e340 g\/L VOC content — verify compliance with local air quality regulations before use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for direct application to bare or previously coated metal surfaces in indoor and outdoor settings. Suitable for use on structural steel, equipment, railings, and similar metal substrates where an alkyd gloss enamel finish is specified.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eApplication should be performed by a qualified painter or maintenance technician familiar with surface preparation requirements for alkyd coatings on metal. Clean and degrease all surfaces thoroughly before application — mill scale, rust, oil, and loose coatings must be removed to ensure adhesion. Do not apply below 32 degrees F or above 100 degrees F, and avoid application in high-humidity conditions that can affect dry times. Consult local regulations regarding VOC limits before use, as 340 g\/L may restrict use in certain air quality management districts.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Alkyd Enamel Paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Gloss\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Family\u003c\/strong\u003e: Gray\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Size\u003c\/strong\u003e: 1,280 fl oz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContainer Type\u003c\/strong\u003e: Can\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage\u003c\/strong\u003e: 230 to 425 sq ft\/gal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC Content\u003c\/strong\u003e: 340 g\/L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect to Metal\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoor\/Outdoor\u003c\/strong\u003e: Indoor and Outdoor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTack-Free Dry Time\u003c\/strong\u003e: 4 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Dry Time\u003c\/strong\u003e: 8 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat Dry Time\u003c\/strong\u003e: 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Application Temperature\u003c\/strong\u003e: 32 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Application Temperature\u003c\/strong\u003e: 100 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 6.63 inches x 6.63 inches x 7.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 12.091 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: RUST-OLEUM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 245309\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RUST-OLEUM","offers":[{"title":"Default Title","offer_id":51702599483698,"sku":"245309","price":133.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/250ded15dd5cb27eae26c0e9948209e5.jpg?v=1788412233","url":"https:\/\/voomisupply.com\/products\/rust-oleum-245309-alkyd-enamel-paint-gloss-gray-1280-fl-oz","provider":"Voomi Supply","version":"1.0","type":"link"}