{"product_id":"romac-268-112031-restrained-end-cap-10-inch","title":"Romac 268-112031 Restrained End Cap 10 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ROMAC 268-112031 is a 10-inch wide range restrained end cap designed to seal plain-end pipe for testing, blow-off, or line flushing operations, and is equally suited for permanent pipe end sealing applications. Cast components including end rings, center ring, and bolt guides are ductile iron meeting ASTM A-536, grade 65-45-12. Fasteners are 304 stainless steel. The cap accommodates up to 4 degrees of deflection, making it adaptable to field conditions. A Romacote fusion bonded epoxy coating provides corrosion resistance. Rubber gaskets are SBR compounded for water and sewer service or NBR as required, both certified to NSF 61. Licensed plumbers and waterworks contractors are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis end cap covers a wide pipe outside-diameter range spanning IPS PVC through cast iron pipe, making it practical across mixed-material infrastructure. Typical applications include municipal water distribution, sewer force mains, industrial piping, and contractor field testing where a restrained, leak-free temporary or permanent cap is required. The multi-purpose design reduces the need for separate testing-only and permanent-seal fittings, simplifying inventory on active jobsites.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDuctile iron cast components meeting ASTM A-536, grade 65-45-12 for structural reliability\u003c\/li\u003e\n  \u003cli\u003eAccommodates up to 4 degrees of deflection for field alignment flexibility\u003c\/li\u003e\n  \u003cli\u003eRomacote fusion bonded epoxy coating for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSBR or NBR rubber gaskets rated for water and sewer service per ASTM D-2000, NSF 61 certified\u003c\/li\u003e\n  \u003cli\u003e304 stainless steel hardware, uncoated\u003c\/li\u003e\n  \u003cli\u003eSuitable for testing, blow-off, line flushing, or permanent end sealing\u003c\/li\u003e\n  \u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use on 10-inch plain-end pipe ranging from IPS PVC through cast iron. Complies with ANSI 372, ANSI 61, ASTM A-536 grade 65-45-12, ASTM D-2000, NSF 372, and NSF 61.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber or qualified waterworks mechanic following applicable local codes and AWWA guidelines. Depressurize and isolate the pipeline before fitting the end cap. Inspect the pipe end for burrs or damage that could compromise the gasket seal prior to assembly. Do not exceed the pressure and deflection ratings specified by the manufacturer for the pipe material and diameter in use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Size\u003c\/strong\u003e: 10 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: End Cap\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Plain End Pipe\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Restraint Joint\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Ductile Iron, Rubber, Stainless Steel, Plastic\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Type\u003c\/strong\u003e: ASTM A-536 Grade 65-45-12 Ductile Iron, SBR or NBR Rubber, 304 Stainless Steel, Reinforced Nylon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Romacote Fusion Bonded Epoxy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Deflection\u003c\/strong\u003e: 4 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNSF Certified\u003c\/strong\u003e: Yes - NSF 61, NSF 372\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI Standards\u003c\/strong\u003e: ANSI 61, ANSI 372\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eASTM Standards\u003c\/strong\u003e: ASTM A-536 Grade 65-45-12, ASTM D-2000\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ROMAC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 268-112031\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ROMAC","offers":[{"title":"Default Title","offer_id":51467706499378,"sku":"268-112031","price":1393.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313947229.jpg?v=1783910903","url":"https:\/\/voomisupply.com\/products\/romac-268-112031-restrained-end-cap-10-inch","provider":"Voomi Supply","version":"1.0","type":"link"}